HAK31 Tool Turret Lathe

[RC-Lights]

hi,

has anyone experience with the HAK31 Tool Turret for lathes ? My Lathe is roughly running now and i plan to have a tool turret in further steps, maybe in half a year. i had a look on these turrets since more than one year. now i found this offer, the price is really good, better than ever seen before in the last year.

https://de.aliexpress.com/item/10050061 ... ry_from%3A

i have the datasheet from the seller, attached.

but i had no time before to check and learn how a tool turret is implemented in AcornSix. can anybody have a look to the datasheet and tell me, if this turret works with Acorn ? What do i need ? Ultimate Licence is available,

i understand the principal logic, but for the details i need help.

thank you a lot in advance.

best regards,
Michael

[cnckeith]

this turret looks pretty typical
Acorn and AcornSix have preprogrammed typical setups for common turret configurations.
you can start with one of those and modify to your needs.

[RC-Lights]

okay, thank you a lot.

i had a deeper look to the Centroid ATC Folder with the different Grey-Codes and from principal function i understand that. but right now i would have no idea how to connect the turret to the Acorn6 board.

when i look in the data-sheet, i see those three pictures regarding the wiring:

Signal port should be almost clear

but with these both i am not sure how to handle them. can i choose on of theese ? can i choose if the control need encoder signal or Hall-Sensor signal ?in the grey-code folder i found two variants with encoder wiring, that makes sense to me.

thank you a lot

Michael

[cnckeith]

for the Acorn side of things, search "turret" here and you will find typical hookups for common turrets for Acorn
https://www.centroidcnc.com/centroid_di ... browse.php#
like this one
https://www.centroidcnc.com/dealersuppo ... 006.r2.pdf