Id like to do some ballscrew mapping with my Acorn setup.
I've realized a glass linear scale with best resolution/accuracy is needed. Id like to avoid buying the DRO display. Its a standard Chinese unit from eBay. RS422 output.
Is it possible to hook up the scale to the Acorn encoder input and have it read the position directly?
I've seen posts about this with Acorn-6 however can it be done with the regular 4-axis board?
Linear Scale with Acorn 4-axis
Moderator: cnckeith
-
- Posts: 60
- Joined: Wed Oct 13, 2021 11:58 am
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
-
- Posts: 3135
- Joined: Tue Mar 22, 2016 10:03 am
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: Yes
- Oak CNC controller: Yes
- CNC Control System Serial Number: 100505
100327
102696
103432
7804732B977B-0624192192 - DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
- Location: Boston, MA
- Contact:
Re: Linear Scale with Acorn 4-axis
Yes, it can be done with Acorn. I don't know if it's possible with the Wizard. You may have to edit the parameters directly.
Cheers,
Tom
Confidence is the feeling you have before you fully understand the situation.
I have CDO. It's like OCD, but the letters are where they should be.
Tom
Confidence is the feeling you have before you fully understand the situation.
I have CDO. It's like OCD, but the letters are where they should be.
-
- Posts: 7439
- Joined: Wed Mar 03, 2010 4:23 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: Yes
- Oak CNC controller: Yes
- CNC Control System Serial Number: none
- DC3IOB: Yes
- CNC11: Yes
- CPU10 or CPU7: Yes
- Contact:
Re: Linear Scale with Acorn 4-axis
yes, as long as the scale has output that matches standard scale / encoder output defined here.
https://centroidcncforum.com/viewtopic.php?f=63&t=921
alternatively
others have just bought a cheap DRO to do the same thing.
https://centroidcncforum.com/viewtopic. ... rew#p80095
https://centroidcncforum.com/viewtopic.php?f=63&t=921
alternatively
others have just bought a cheap DRO to do the same thing.
https://centroidcncforum.com/viewtopic. ... rew#p80095
Need support? READ THIS POST first. http://centroidcncforum.com/viewtopic.php?f=60&t=1043
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html