Just found this setup on Amazon. This is what I am going to use unless any of you had problems with this setup. It looks to me like I will need a power supply for each drive. I have no problem with that. Can someone please help me confirm they will work with Acorn. I just spent so much time looking at wiring diagrams I think my eyes are about to blow up. . Thank You
https://www.amazon.com/stepper-Controll ... 106&sr=1-5
Closed loop stepper
Moderator: cnckeith
-
- Posts: 2261
- Joined: Fri May 24, 2019 8:34 am
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: 7804734C6498-0401191832
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
- Location: Clearwater, FL
Re: Closed loop stepper
Yes, those will work with Acorn. It's a standard close loop stepper. Those will wire to the DB25 so you'll also need to order a DB25 breakout board from Amazon as well.
Like this:
https://www.amazon.com/gp/product/B073R ... 1965d6ae5a
Like this:
https://www.amazon.com/gp/product/B073R ... 1965d6ae5a
-
- Posts: 11
- Joined: Thu Mar 07, 2024 6:14 pm
- Acorn CNC Controller: Yes
- Plasma CNC Controller: No
- AcornSix CNC Controller: No
- Allin1DC CNC Controller: No
- Hickory CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
Re: Closed loop stepper
Thanks.
-
- Posts: 7411
- Joined: Wed Mar 03, 2010 4:23 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: Yes
- Oak CNC controller: Yes
- CNC Control System Serial Number: none
- DC3IOB: Yes
- CNC11: Yes
- CPU10 or CPU7: Yes
- Contact:
Re: Closed loop stepper
i moved this thread into the Acorn forum
Need support? READ THIS POST first. http://centroidcncforum.com/viewtopic.php?f=60&t=1043
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html