Is a Western Digital SSD acceptable for use with Acorn Six and CNC12? I see that Centroid only recommends Intel and Samsung SSD.
I have a HP computer with i5 quad core and 8 gigs of ram and a new Western Digital SSD that i want to use with CNC12 and Acorn.
Thanks
SSD for Acorn Six and CNC12
Moderator: cnckeith
-
- Posts: 1
- Joined: Fri Oct 13, 2023 7:56 pm
- Acorn CNC Controller: No
- Plasma CNC Controller: No
- AcornSix CNC Controller: No
- Allin1DC CNC Controller: No
- Hickory CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC12: No
- CNC11: No
- CPU10 or CPU7: No
-
- Posts: 3135
- Joined: Tue Mar 22, 2016 10:03 am
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: Yes
- Oak CNC controller: Yes
- CNC Control System Serial Number: 100505
100327
102696
103432
7804732B977B-0624192192 - DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
- Location: Boston, MA
- Contact:
Re: SSD for Acorn Six and CNC12
WD SSDs are more than good enough. The recommendation is more to NOT buy the $5.99 special from Alibaba.
Cheers,
Tom
Confidence is the feeling you have before you fully understand the situation.
I have CDO. It's like OCD, but the letters are where they should be.
Tom
Confidence is the feeling you have before you fully understand the situation.
I have CDO. It's like OCD, but the letters are where they should be.
-
- Posts: 2278
- Joined: Fri May 24, 2019 8:34 am
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: 7804734C6498-0401191832
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
- Location: Clearwater, FL
Re: SSD for Acorn Six and CNC12
It doesn't matter what brand it is as long as it's an SSD, they are WAYYYY faster than the old school HDD. You can even use the old school HDD it's just not recommended.