Big progress but stuck on the part below.
Is the tool offset library in the parm's?
I want to be able to read and write to them within a macro and not have to go into the library itself.
Is there a way?
Ken
Tool offset Help ??
Moderator: cnckeith
-
Ken Rychlik
- Posts: 353
- Joined: Wed Jan 23, 2019 4:19 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: 80F5B5B92C3A-0213236854
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
Tool offset Help ??
Last edited by Ken Rychlik on Mon Mar 11, 2024 9:47 pm, edited 1 time in total.
Re: Tool offset library in param's ??
Tool offsets are not in the Machine Parameters table with Parameters 0 - 999.
Tool Offsets are accessible as CNC system variables, #10000 - #10200 and #11000 - #11200. See section 11.2.16 of the Mill operator's manual (page 193 in the 1/11/24 PDF version).
Tool offsets can also be set using the G10 code. See section 12.6 of the Mill operator's manual (page 237 in the 1/11/24 PDF version).
Tool Offsets are accessible as CNC system variables, #10000 - #10200 and #11000 - #11200. See section 11.2.16 of the Mill operator's manual (page 193 in the 1/11/24 PDF version).
Tool offsets can also be set using the G10 code. See section 12.6 of the Mill operator's manual (page 237 in the 1/11/24 PDF version).
-
Ken Rychlik
- Posts: 353
- Joined: Wed Jan 23, 2019 4:19 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: 80F5B5B92C3A-0213236854
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
Re: Tool offset library in param's ??
Figured out and fixed
Last edited by Ken Rychlik on Thu Mar 14, 2024 8:26 pm, edited 1 time in total.
Ken