Hi,
I recently updateed to CNC12 v5.08 and noticed that when I set the feed rate to 25% the machine still jogged at 100%. What am I missing here?
Thanks.
Jog Speeds after Update to CNC12 V5.08
Moderator: cnckeith
-
tuffduck
- Posts: 359
- Joined: Mon Mar 02, 2020 5:07 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
- Location: Scotland, ON, Canada
Jog Speeds after Update to CNC12 V5.08
- Attachments
-
- report_E415F6F250EF-0205202948_2024-03-08_18-59-21.zip
- (911.22 KiB) Not downloaded yet
-
avp
- Posts: 129
- Joined: Fri Aug 13, 2021 12:25 pm
- Acorn CNC Controller: Yes
- Plasma CNC Controller: No
- AcornSix CNC Controller: No
- Allin1DC CNC Controller: No
- Hickory CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: E062346A1C67-0716214939
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
- Location: New York
Re: Jog Speeds after Update to CNC12 V5.08
The feed rate and rapid rate are separate now. Dialing back the rapid rate will affect your jog speed.
-
tuffduck
- Posts: 359
- Joined: Mon Mar 02, 2020 5:07 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
- Location: Scotland, ON, Canada
Re: Jog Speeds after Update to CNC12 V5.08
Thank you!
-
cnckeith
- Posts: 7334
- Joined: Wed Mar 03, 2010 4:23 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: Yes
- Oak CNC controller: Yes
- CNC Control System Serial Number: none
- DC3IOB: Yes
- CNC11: Yes
- CPU10 or CPU7: Yes
- Contact:
Re: Jog Speeds after Update to CNC12 V5.08
as AVP pointed out (thanks) in v5.08 jog speeds are linked to the rapid override.
We have changed that for v5.1 , in v5.01 jog speeds linked to the feedrate override controls
We have changed that for v5.1 , in v5.01 jog speeds linked to the feedrate override controls
Need support? READ THIS POST first. http://centroidcncforum.com/viewtopic.php?f=60&t=1043
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html