Trak Mill Rebuild

[Angelo DiCenso]

Hello cnckeith;

I will add a 0.1uf cap to the output and check again and if you say that it does not concern the rigid tapping, I will be ok with that.

I forgot to mention that I also tried another pc with the same results.
I did go through all of the above mentioned tb's and videos and changed the nic to 100mhz full duplex

https://photos.google.com/album/AF1QipM ... u58CQGDpP0

[Angelo DiCenso]

the pc is a lenovo tinkcentre I5 6500T 2.5ghz 4 cores, 4 treads and single treads rating of 1791 not that great but above the 1500.

[Angelo DiCenso]

Good Afternoon All;

Totally re installed windows 10 pro starting with formatting the drive and all works now no errors on the com_stress_test. This is great, thanks a lot guys for the help