Hi all,
I have a question about the software as the clearpath have , the auto tuner for making all the axes setup as easyest way it can.
Is there other servo compagny that doing the same ?
I bought chinese and can't find how to set it up and I have problem that are recuring and didn't like to want to stop (jerking , kind of vibrating when moving so for small detail is very not useful )
I read that DMM as sommething like it but for the other ?
I received a quote from DMM for 4 1.8khz and would cost me 5000.00 ca $ ,I want to find the equivalent at least expensive .
thanks
Alain
servo drive compagny as a software for tuneup/auto tuneup.
Moderator: cnckeith
-
- Posts: 7334
- Joined: Wed Mar 03, 2010 4:23 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: Yes
- Oak CNC controller: Yes
- CNC Control System Serial Number: none
- DC3IOB: Yes
- CNC11: Yes
- CPU10 or CPU7: Yes
- Contact:
Re: servo drive compagny as a software for tuneup/auto tuneup.
Leadshine, Teknic, Yaskawa, Delta, Sureservo software auto tune works well
cheap china ac drives often has poor supporting software or it looks like they have auto tune but they really don't.
i've had to hand tune a few and it took all day, certainly not worth trying to save a few bucks and then waste all day trying to tune them
cheap china ac drives often has poor supporting software or it looks like they have auto tune but they really don't.
i've had to hand tune a few and it took all day, certainly not worth trying to save a few bucks and then waste all day trying to tune them
Need support? READ THIS POST first. http://centroidcncforum.com/viewtopic.php?f=60&t=1043
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html
-
- Posts: 15
- Joined: Thu Feb 01, 2024 5:34 am
- Acorn CNC Controller: No
- Plasma CNC Controller: No
- AcornSix CNC Controller: No
- Allin1DC CNC Controller: No
- Hickory CNC Controller: Yes
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
- Contact:
Re: servo drive compagny as a software for tuneup/auto tuneup.
I can second the delta /sureservo's. Especially the new range (b3,A3). The older ones were much worse.