Wierd tool offset issue <resolved, set tool # when setting Z 0>

All things related to the Centroid Acorn CNC Controller

Moderator: cnckeith

cnckeith
Posts: 7334
Joined: Wed Mar 03, 2010 4:23 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: Yes
Oak CNC controller: Yes
CNC Control System Serial Number: none
DC3IOB: Yes
CNC11: Yes
CPU10 or CPU7: Yes
Contact:

Re: Wierd tool offset issue

Post by cnckeith »



and using a reference tool

Need support? READ THIS POST first. http://centroidcncforum.com/viewtopic.php?f=60&t=1043
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html
GDawson
Posts: 11
Joined: Thu Aug 03, 2023 6:12 pm
Acorn CNC Controller: Yes
Plasma CNC Controller: No
AcornSix CNC Controller: No
Allin1DC CNC Controller: No
Hickory CNC Controller: No
Oak CNC controller: No
CNC Control System Serial Number: unknown at this moment acorn was just purchased
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No

Re: Wierd tool offset issue

Post by GDawson »

Ok, thank you we will check them out and see what we make of it.
GDawson
Posts: 11
Joined: Thu Aug 03, 2023 6:12 pm
Acorn CNC Controller: Yes
Plasma CNC Controller: No
AcornSix CNC Controller: No
Allin1DC CNC Controller: No
Hickory CNC Controller: No
Oak CNC controller: No
CNC Control System Serial Number: unknown at this moment acorn was just purchased
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No

Re: Wierd tool offset issue

Post by GDawson »

Ok, the video's contained the missing link, using the part setup page got everything working.
Thank you,
Greg
cnckeith
Posts: 7334
Joined: Wed Mar 03, 2010 4:23 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: Yes
Oak CNC controller: Yes
CNC Control System Serial Number: none
DC3IOB: Yes
CNC11: Yes
CPU10 or CPU7: Yes
Contact:

Re: Wierd tool offset issue <resolved, tell cnc12 tool number when setting z zero>

Post by cnckeith »

GDawson wrote: Thu Feb 29, 2024 5:26 pm Ok, the video's contained the missing link, using the part setup page got everything working.
Thank you,
Greg
thanks for reporting back
Need support? READ THIS POST first. http://centroidcncforum.com/viewtopic.php?f=60&t=1043
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html
Post Reply