Lathe CAM post processor
Moderator: cnckeith
-
- Posts: 88
- Joined: Thu Sep 21, 2023 10:13 am
- Acorn CNC Controller: Yes
- Plasma CNC Controller: No
- AcornSix CNC Controller: No
- Allin1DC CNC Controller: No
- Hickory CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
- Location: United Kingdom
Lathe CAM post processor
Is there a specific CAM post processor for Catia V5 I use the CAD software at work but can't find a suitable CAM post processor for centroid. I have tried Haas and Fanuc but they are not correct.
-
- Posts: 370
- Joined: Tue Dec 11, 2018 4:03 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: F045DA80C8B8-0905181172
E415F6F70BC3-0318203049
98F07B91FC6B-0123236802 - DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
- Location: UK
Re: Lathe CAM post processor
Since both Catia and Solidworks are under the Dassault umbrella, perhaps the following post may help
https://centroidcncforum.com/viewtopic.php?f=60&t=4101
https://centroidcncforum.com/viewtopic.php?f=60&t=4101
Hope this helps
Nigel
"You can lead a horse to water but you cannot force it to drink"
Nigel
"You can lead a horse to water but you cannot force it to drink"
-
- Posts: 88
- Joined: Thu Sep 21, 2023 10:13 am
- Acorn CNC Controller: Yes
- Plasma CNC Controller: No
- AcornSix CNC Controller: No
- Allin1DC CNC Controller: No
- Hickory CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
- Location: United Kingdom
Re: Lathe CAM post processor
I had a look at the files but it needs a lib and PP file for catiaNigelo wrote: ↑Tue Feb 20, 2024 8:56 am Since both Catia and Solidworks are under the Dassault umbrella, perhaps the following post may help
https://centroidcncforum.com/viewtopic.php?f=60&t=4101