CNC12 V5.08 VCP Rapid/Feed Panel Issue/Bug <self resolved>

[TopQuarkDoc]

Well, color me very embarrassed.

When I started everything up today to make the video, the problem was not recreatable!!

I'm going to blame the occurrence of this anomaly on multiple neutrino - antineutrino collisions inside the non-ECC RAM, flipping a bit, in the PC running CNC12. These collisions, though exceeding rare, would be attributable to the recent in increase in solar activity.

Sorry for wasting everyone's time.

Tim

[TopQuarkDoc]

OK, I apologized a bit too soon!! The problem returned. It was while I was machining a part, but I didn't have the time/resources to video it. It apparently is not reproducible unless machining a part, and it might be G code specific to the part. In the near future, I'll post a video of the problem, and the G code for the part to see if someone can replicate it. (And a report.zip) It's a nit compared to the overall excellent nature of the CNC12/Acorn products, functionality and documentation for us less than professional users.

Tim

[cnckeith]

OK, I apologized a bit too soon!! The problem returned. It was while I was machining a part, but I didn't have the time/resources to video it. It apparently is not reproducible unless machining a part, and it might be G code specific to the part. In the near future, I'll post a video of the problem, and the G code for the part to see if someone can replicate it. (And a report.zip) It's a nit compared to the overall excellent nature of the CNC12/Acorn products, functionality and documentation for us less than professional users.

Tim

we are on stand by.

[Nigelo]

we are on stand by.

Keith, you are beginning to sound like the Control Tower at Shawn's airfield where he keeps his F16

[TopQuarkDoc]

A couple of times around the pattern and we’ll be landing.