Well, color me very embarrassed.
When I started everything up today to make the video, the problem was not recreatable!!
I'm going to blame the occurrence of this anomaly on multiple neutrino - antineutrino collisions inside the non-ECC RAM, flipping a bit, in the PC running CNC12. These collisions, though exceeding rare, would be attributable to the recent in increase in solar activity.
Sorry for wasting everyone's time.
Tim
CNC12 V5.08 VCP Rapid/Feed Panel Issue/Bug <self resolved>
Moderator: cnckeith
-
- Posts: 21
- Joined: Sun Nov 29, 2020 11:12 am
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: F045DA7F1D5B-0109191641
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
-
- Posts: 21
- Joined: Sun Nov 29, 2020 11:12 am
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: F045DA7F1D5B-0109191641
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
Re: CNC12 V5.08 VCP Rapid/Feed Panel Issue/Bug - It returned
OK, I apologized a bit too soon!! The problem returned. It was while I was machining a part, but I didn't have the time/resources to video it. It apparently is not reproducible unless machining a part, and it might be G code specific to the part. In the near future, I'll post a video of the problem, and the G code for the part to see if someone can replicate it. (And a report.zip) It's a nit compared to the overall excellent nature of the CNC12/Acorn products, functionality and documentation for us less than professional users.
Tim
Tim
-
- Posts: 7334
- Joined: Wed Mar 03, 2010 4:23 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: Yes
- Oak CNC controller: Yes
- CNC Control System Serial Number: none
- DC3IOB: Yes
- CNC11: Yes
- CPU10 or CPU7: Yes
- Contact:
Re: CNC12 V5.08 VCP Rapid/Feed Panel Issue/Bug - It returned
we are on stand by.TopQuarkDoc wrote: ↑Wed Feb 28, 2024 12:03 pm OK, I apologized a bit too soon!! The problem returned. It was while I was machining a part, but I didn't have the time/resources to video it. It apparently is not reproducible unless machining a part, and it might be G code specific to the part. In the near future, I'll post a video of the problem, and the G code for the part to see if someone can replicate it. (And a report.zip) It's a nit compared to the overall excellent nature of the CNC12/Acorn products, functionality and documentation for us less than professional users.
Tim
Need support? READ THIS POST first. http://centroidcncforum.com/viewtopic.php?f=60&t=1043
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html
-
- Posts: 370
- Joined: Tue Dec 11, 2018 4:03 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: F045DA80C8B8-0905181172
E415F6F70BC3-0318203049
98F07B91FC6B-0123236802 - DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
- Location: UK
Re: CNC12 V5.08 VCP Rapid/Feed Panel Issue/Bug - It returned
Keith, you are beginning to sound like the Control Tower at Shawn's airfield where he keeps his F16
Hope this helps
Nigel
"You can lead a horse to water but you cannot force it to drink"
Nigel
"You can lead a horse to water but you cannot force it to drink"
-
- Posts: 21
- Joined: Sun Nov 29, 2020 11:12 am
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: F045DA7F1D5B-0109191641
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
Re: CNC12 V5.08 VCP Rapid/Feed Panel Issue/Bug <self resolved>
A couple of times around the pattern and we’ll be landing.