anyone use this servo it ac 1000 watt seams cheap enough i purchased 1 to test out seams built good
https://www.omc-stepperonline.com/t6-se ... 0h2a3-m17s
stepper online servo
Moderator: cnckeith
-
- Posts: 7334
- Joined: Wed Mar 03, 2010 4:23 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: Yes
- Oak CNC controller: Yes
- CNC Control System Serial Number: none
- DC3IOB: Yes
- CNC11: Yes
- CPU10 or CPU7: Yes
- Contact:
Re: stepper online servo
cool lets us know how it goes, looks interesting
Need support? READ THIS POST first. http://centroidcncforum.com/viewtopic.php?f=60&t=1043
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html
-
- Posts: 1980
- Joined: Thu Sep 23, 2021 3:49 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: 6433DB0446C1-08115074
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
- Location: Germany
Re: stepper online servo
These are Leadshine Servos, driver is without 0-10V input.
They work fine with Acorn, 200khz on Headers and up to 500 khz on DB25.
Easy to wire, because all screw terminals no soldering for a custom cable.
Uwe
They work fine with Acorn, 200khz on Headers and up to 500 khz on DB25.
Easy to wire, because all screw terminals no soldering for a custom cable.
Uwe