Dyna Myte 3000 Spindle Driver Help
Posted: Sun Jan 07, 2024 4:46 pm
Hi everyone,
I am struggling to figure out how to wire up an Advanced Motion Controls PWM Servo Amplifier for my Dyna Myte 3000 conversion. I am attempting to use the existing DC servo spindle, but I'm having trouble connecting the motor and driver and controlling them with the Acorn.
The machine came with a 30A20AC Advanced Motion Controls PWM Servo Amplifier when I purchased it, and the spindle motor is a SEM MT30 U4-48. The motor junction box has some markings inside, and I have attached some images of the driver connections and the driver spec sheet.
If anyone has experience with this type of setup, I would greatly appreciate any guidance you could provide me.
Also, I am attaching my Google Photo link with additional images and specs.
Thank you.
L.Adams
New River, AZ
Update: I added a wiring diagram PDF for how I currently have it wired.
https://photos.app.goo.gl/Y94mwSYnB1y4CFpp7
I am struggling to figure out how to wire up an Advanced Motion Controls PWM Servo Amplifier for my Dyna Myte 3000 conversion. I am attempting to use the existing DC servo spindle, but I'm having trouble connecting the motor and driver and controlling them with the Acorn.
The machine came with a 30A20AC Advanced Motion Controls PWM Servo Amplifier when I purchased it, and the spindle motor is a SEM MT30 U4-48. The motor junction box has some markings inside, and I have attached some images of the driver connections and the driver spec sheet.
If anyone has experience with this type of setup, I would greatly appreciate any guidance you could provide me.
Also, I am attaching my Google Photo link with additional images and specs.
Thank you.
L.Adams
New River, AZ
Update: I added a wiring diagram PDF for how I currently have it wired.
https://photos.app.goo.gl/Y94mwSYnB1y4CFpp7