I turned on my CNC this morning, I received a 9031 error immediately upon clearing and trying to home.
Running the Lathe Pro 5.06 Version.
Tried restarting and clearing error and received it multiple times.
Lossed as to the cause and the fix?
Board went bad?
Software corruption?
Any help or ideas would be greatly appreciated!
Drive Fault Error 9031
Moderator: cnckeith
-
JerryLouisMartin
- Posts: 131
- Joined: Mon Oct 14, 2019 4:46 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: E8EB1128AAC4-0405180824
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
-
suntravel
- Posts: 1982
- Joined: Thu Sep 23, 2021 3:49 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: 6433DB0446C1-08115074
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
- Location: Germany
Re: Drive Fault Error 9031
9031 Drive Fault error is when one drive is in ALM, Drive OK input is set.
Check the input assigned to Drive Ok
Uwe
Check the input assigned to Drive Ok
Uwe
-
JerryLouisMartin
- Posts: 131
- Joined: Mon Oct 14, 2019 4:46 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: E8EB1128AAC4-0405180824
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
Re: Drive Fault Error 9031
Thanks for the assist!