homing travels in wrong direction

[suntravel]

Axis 1+2 ar searching home in negative direction, if you want them to run in positive direction, change to M92

CTRL+P in the Wizard generates a PDF of all screens...

Uwe

[billybobron]

Interesting this is how it was set when someone else helped, that contributes to what drove one of my responses in the past then I went silent for a while! I am going to try this now and report back shortly

[billybobron]

I changed and ran it still travels in the same direction in the down ward direction! I did this as well yesterday as I had posted with the same out come I hit the EStop so that the spindle wouldn’t bottom out on the waste board see photo

[suntravel]

If you jog Z in + direction, will it go up or down?

Uwe

[RogDC]

If you hit Ctrl+P while in the wizard it will generate screenshots of all screens. Print to Windows PDF and save, then post PDF file here.

[billybobron]

It does go up and down with both controls

[billybobron]

The PDF is attached, I need to go back and look at some notes of a conversation that I was having of this board, I seem to recall that I seem to recall I had a similar problem during original wire up I just don't recall exactly what it was I will be tackling that in the morning still don't have everything set like I want, I let the build go for several weeks without touching and now trying to complete everything when this popped up.

[suntravel]

It does go up and down with both controls

That is not the answer.

Will it move up if you jog +Z ?

If not set Direction Reversal to Y

Uwe

[billybobron]

Yes it travels upwards when toggled

[suntravel]

Then it will move with M92/Z L1 also upwards.