Axis 1+2 ar searching home in negative direction, if you want them to run in positive direction, change to M92
CTRL+P in the Wizard generates a PDF of all screens...
Uwe
homing travels in wrong direction
Moderator: cnckeith
-
- Posts: 93
- Joined: Mon Jun 12, 2023 5:22 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
Re: homing travels in wrong direction
Interesting this is how it was set when someone else helped, that contributes to what drove one of my responses in the past then I went silent for a while! I am going to try this now and report back shortly
-
- Posts: 93
- Joined: Mon Jun 12, 2023 5:22 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
Re: homing travels in wrong direction
I changed and ran it still travels in the same direction in the down ward direction! I did this as well yesterday as I had posted with the same out come I hit the EStop so that the spindle wouldn’t bottom out on the waste board see photo
-
- Posts: 1982
- Joined: Thu Sep 23, 2021 3:49 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: 6433DB0446C1-08115074
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
- Location: Germany
Re: homing travels in wrong direction
If you jog Z in + direction, will it go up or down?
Uwe
Uwe
-
- Posts: 148
- Joined: Wed Jan 01, 2020 2:40 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
Re: homing travels in wrong direction
If you hit Ctrl+P while in the wizard it will generate screenshots of all screens. Print to Windows PDF and save, then post PDF file here.
-
- Posts: 93
- Joined: Mon Jun 12, 2023 5:22 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
Re: homing travels in wrong direction
It does go up and down with both controls
-
- Posts: 93
- Joined: Mon Jun 12, 2023 5:22 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
Re: homing travels in wrong direction
The PDF is attached, I need to go back and look at some notes of a conversation that I was having of this board, I seem to recall that I seem to recall I had a similar problem during original wire up I just don't recall exactly what it was I will be tackling that in the morning still don't have everything set like I want, I let the build go for several weeks without touching and now trying to complete everything when this popped up.
- Attachments
-
- acornpdf.pdf
- (1.27 MiB) Downloaded 7 times
-
- Posts: 1982
- Joined: Thu Sep 23, 2021 3:49 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: 6433DB0446C1-08115074
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
- Location: Germany
Re: homing travels in wrong direction
That is not the answer.
Will it move up if you jog +Z ?
If not set Direction Reversal to Y
Uwe
-
- Posts: 93
- Joined: Mon Jun 12, 2023 5:22 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
Re: homing travels in wrong direction
Yes it travels upwards when toggled
-
- Posts: 1982
- Joined: Thu Sep 23, 2021 3:49 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: 6433DB0446C1-08115074
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
- Location: Germany
Re: homing travels in wrong direction
Then it will move with M92/Z L1 also upwards.