Centroid Community CNC Support Forum

Hopefully this can be a place to show off your setup of your Acorn controller and machine

Machine Moog Hydar-Point 83-1000
Hartford 2hp head step pulley with a rotary phase converter
HP Compaq 8300 Elite Ultra Slim Business PC, Intel i5 3470 , 3.2GHZ 8GB RAM,128GB SSD Win 10 Pro wifi
No touch yet but coming
Dyna4 H01A2 drives
X axes 1:1 ratio with 750 watt 880-DST-A6 HK1
Y axes the same
Z axes 2:1 ratio with a 1kw 11A-DST-A6 HK1

ABOSLUTELY!
Share your progress and outcome and by all means ask any questions.
I'll be curious to know how it works out with the knee as your Z axis.
Looking good so far!
Marty

short video of an Acorn CNC controller running a Bridgeport Interact with Yaskawa and Panasonic AC servo motors and drives.

short video of an Acorn CNC controller running a moving gantry CNC router.

Beevo's Acorn running his mill.

https://youtu.be/eaCMDlg0fkE

I'm a weak typist, so here you go....

http://www.beevo.org/MetalWorking/Acorn ... Index.html