Yeah, I have had a really hard time to keep my printed documentation up to date
One reason my CNCs are now dual monitor...
Uwe
TB270 and TB309(Rev4) Comm error <resolved>
Moderator: cnckeith
-
- Posts: 2234
- Joined: Fri May 24, 2019 8:34 am
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: 7804734C6498-0401191832
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
- Location: Clearwater, FL
Re: TB270 and TB309(Rev4) Comm error unresolved
That's one reason I NEVER print anything, because Centroid is always thinking outside the box and continually improving and updating their software and hardware unlike the other DIY CNC controller companies. The ink usually isn't dry by the time the next update/improvement is announced.
-
- Posts: 7334
- Joined: Wed Mar 03, 2010 4:23 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: Yes
- Oak CNC controller: Yes
- CNC Control System Serial Number: none
- DC3IOB: Yes
- CNC11: Yes
- CPU10 or CPU7: Yes
- Contact:
Re: TB270 and TB309(Rev4) Comm error <resolved>
duplex info in on page 5 of TB270
https://www.centroidcnc.com/dealersuppo ... ds/270.pdf
it is not included in tb309 since most PC's NIC are on Auto Negotiate (just like the Aconr BBG) and work just fine. for some reason which we don't fully understand some PC's need this setting changed to eliminate Com errors
https://www.centroidcnc.com/dealersuppo ... ds/270.pdf
it is not included in tb309 since most PC's NIC are on Auto Negotiate (just like the Aconr BBG) and work just fine. for some reason which we don't fully understand some PC's need this setting changed to eliminate Com errors
Need support? READ THIS POST first. http://centroidcncforum.com/viewtopic.php?f=60&t=1043
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html