I found a bug in 5.06 Arcor6 lathe.
RTG displays only the x-axis
On first start a lot of lines with Z position...
Uwe
CNC12 v5.06 has been released.
Moderator: cnckeith
-
- Posts: 1979
- Joined: Thu Sep 23, 2021 3:49 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: 6433DB0446C1-08115074
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
- Location: Germany
Re: CNC12 v5.06 has been released.
- Attachments
-
- report_0008DC111213-0511220026_2023-09-23_13-00-03.zip
- (1.02 MiB) Downloaded 34 times
-
- Posts: 1979
- Joined: Thu Sep 23, 2021 3:49 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: 6433DB0446C1-08115074
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
- Location: Germany
Re: CNC12 v5.06 has been released.
Main Screen Lathe is also missing Machine Coord. and G-code.
Mill Acorn is correct.
Mill Acorn is correct.
-
- Posts: 97
- Joined: Fri Dec 25, 2020 2:06 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
Re: CNC12 v5.06 has been released.
Acorn Router does not reconniz my pro *.dat licence .
What to do
license-E415F6F138CC-1119204064-C146XXX -acorn-pro-router
What to do
license-E415F6F138CC-1119204064-C146XXX -acorn-pro-router
-
- Posts: 7334
- Joined: Wed Mar 03, 2010 4:23 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: Yes
- Oak CNC controller: Yes
- CNC Control System Serial Number: none
- DC3IOB: Yes
- CNC11: Yes
- CPU10 or CPU7: Yes
- Contact:
Re: CNC12 v5.06 has been released.
post a fresh report.zip and the license file.
Need support? READ THIS POST first. http://centroidcncforum.com/viewtopic.php?f=60&t=1043
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html
-
- Posts: 7334
- Joined: Wed Mar 03, 2010 4:23 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: Yes
- Oak CNC controller: Yes
- CNC Control System Serial Number: none
- DC3IOB: Yes
- CNC11: Yes
- CPU10 or CPU7: Yes
- Contact:
Re: CNC12 v5.06 has been released.
whoa! we are on it. thanks for reporting.
Need support? READ THIS POST first. http://centroidcncforum.com/viewtopic.php?f=60&t=1043
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html
-
- Posts: 7334
- Joined: Wed Mar 03, 2010 4:23 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: Yes
- Oak CNC controller: Yes
- CNC Control System Serial Number: none
- DC3IOB: Yes
- CNC11: Yes
- CPU10 or CPU7: Yes
- Contact:
Re: CNC12 v5.06 has been released.
fixed in the latest beta release here.
https://centroidcncforum.com/viewtopic.php?f=67&t=9248
also release candidate for the Centroid CNC PC Tuner dropped today as well.
https://centroidcncforum.com/viewtopic.php?f=67&t=9157
https://centroidcncforum.com/viewtopic.php?f=67&t=9248
also release candidate for the Centroid CNC PC Tuner dropped today as well.
https://centroidcncforum.com/viewtopic.php?f=67&t=9157
Need support? READ THIS POST first. http://centroidcncforum.com/viewtopic.php?f=60&t=1043
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html
-
- Posts: 7334
- Joined: Wed Mar 03, 2010 4:23 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: Yes
- Oak CNC controller: Yes
- CNC Control System Serial Number: none
- DC3IOB: Yes
- CNC11: Yes
- CPU10 or CPU7: Yes
- Contact:
Re: CNC12 v5.06 has been released.
CNC12 installation instructions have been updated to include all Centroid Hardware that is capable of running CNC12 and a introduction/discussion section has been added.
(Acorn users will be glad to have the Wizard if they read the Oak/Allin1DC/MPU11 sections)
https://www.centroidcnc.com/centroid_di ... ctions.pdf
(Acorn users will be glad to have the Wizard if they read the Oak/Allin1DC/MPU11 sections)
https://www.centroidcnc.com/centroid_di ... ctions.pdf
Need support? READ THIS POST first. http://centroidcncforum.com/viewtopic.php?f=60&t=1043
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html
-
- Posts: 39
- Joined: Wed Mar 13, 2019 10:57 am
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: 74E182A80DDE-0312191753
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
Re: CNC12 v5.06 has been released.
After installing 5.06 (wpmp-4) on all axis x,y,z has only only one jog speed x1.
x10 , x100 fail to function.
x10 , x100 fail to function.
- Attachments
-
- report_0C1C57043D5E-0423203177_2023-10-18_20-41-41.zip
- (877.81 KiB) Downloaded 30 times
A job worth doing “right", is!
-
- Posts: 25
- Joined: Wed Jan 26, 2022 4:53 pm
- Acorn CNC Controller: Yes
- Plasma CNC Controller: No
- AcornSix CNC Controller: Yes
- Allin1DC CNC Controller: No
- Hickory CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
Re: CNC12 v5.06 has been released.
I get a fatal crash when I exit the Math Help screen:
1. Open either of the canned cycles. 2. Click on Math Help 3. Once in Math Help, click escape key on keyboard, or click the Esc icon on the screen.
A full software crash every time.
CNC12 Lathe v5.06 on ACORNSIX Lathe Pro
Report file attached.
Kind regards
Johannes
Steps I use to reproduce:1. Open either of the canned cycles. 2. Click on Math Help 3. Once in Math Help, click escape key on keyboard, or click the Esc icon on the screen.
A full software crash every time.
CNC12 Lathe v5.06 on ACORNSIX Lathe Pro
Report file attached.
Kind regards
Johannes
- Attachments
-
- report_0008DC111213-0116230086_2023-10-22_07-16-43.zip
- (793.36 KiB) Downloaded 32 times