Reverting to VCP in version 4.82

All things related to the Centroid Acorn CNC Controller

Moderator: cnckeith

Post Reply
Jrlee
Posts: 54
Joined: Wed Jan 09, 2019 1:59 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
CNC Control System Serial Number: F045DA798AE4-1119181352
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No
Contact:

Reverting to VCP in version 4.82

Post by Jrlee »

Installed version 5 over the weekend. Today I decided to use the virtual control panel in 4.82. So I replaced the version 5 VCP folder in the "Resources" folder with the VCP folder from V4.82. All is good EXCEPT I don't have the RESET button or anything else below column 10 on the virtual control panel.
So i powered down and replaced the original vcp folder from V5.x back in the RESOURCES folder as it was originally. The vcp folder from V4.82 was removed from the RESOURCES folder prior to placing the original vcp folder(V5.x).
I still had nothing below column 10 when CNC12 rebooted. Any ideas??
Jr
Attachments
report_F045DA798AE4-1119181352_2023-06-05_15-58-56.zip
(779.65 KiB) Downloaded 1 time
Jrlee
Posts: 54
Joined: Wed Jan 09, 2019 1:59 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
CNC Control System Serial Number: F045DA798AE4-1119181352
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No
Contact:

Re: Reverting to VCP in version 4.82

Post by Jrlee »

VCP
Sword
Posts: 651
Joined: Fri Nov 30, 2018 1:04 pm
Acorn CNC Controller: Yes
Plasma CNC Controller: No
AcornSix CNC Controller: No
Allin1DC CNC Controller: No
Hickory CNC Controller: No
Oak CNC controller: No
CNC Control System Serial Number: none
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No
Location: Thorp WI

Re: Reverting to VCP in version 4.82

Post by Sword »

Scott
cnckeith
Posts: 7164
Joined: Wed Mar 03, 2010 4:23 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: Yes
Oak CNC controller: Yes
CNC Control System Serial Number: none
DC3IOB: Yes
CNC11: Yes
CPU10 or CPU7: Yes
Contact:

Re: Reverting to VCP in version 4.82

Post by cnckeith »

in one sentence. if you have a custom VCP.

edit the new v5.0+ VCP with your custom VCP edits.

- don't just copy over the entire VCP folder. (v5.0 has features that v4.82 doesn't)
- do copy over the individual button folders and any corresponding macros
Need support? READ THIS POST first. http://centroidcncforum.com/viewtopic.php?f=60&t=1043
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html
cnckeith
Posts: 7164
Joined: Wed Mar 03, 2010 4:23 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: Yes
Oak CNC controller: Yes
CNC Control System Serial Number: none
DC3IOB: Yes
CNC11: Yes
CPU10 or CPU7: Yes
Contact:

Re: Reverting to VCP in version 4.82

Post by cnckeith »

i loaded your VCP folder from the report.zip you posted, i dont' see any custom buttons?
do you have a customized VCP in v4.82? if so post a report.zip from v4.82
Need support? READ THIS POST first. http://centroidcncforum.com/viewtopic.php?f=60&t=1043
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html
cnckeith
Posts: 7164
Joined: Wed Mar 03, 2010 4:23 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: Yes
Oak CNC controller: Yes
CNC Control System Serial Number: none
DC3IOB: Yes
CNC11: Yes
CPU10 or CPU7: Yes
Contact:

Re: Reverting to VCP in version 4.82

Post by cnckeith »

Need support? READ THIS POST first. http://centroidcncforum.com/viewtopic.php?f=60&t=1043
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html
cnckeith
Posts: 7164
Joined: Wed Mar 03, 2010 4:23 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: Yes
Oak CNC controller: Yes
CNC Control System Serial Number: none
DC3IOB: Yes
CNC11: Yes
CPU10 or CPU7: Yes
Contact:

Re: Reverting to VCP in version 4.82

Post by cnckeith »

Need support? READ THIS POST first. http://centroidcncforum.com/viewtopic.php?f=60&t=1043
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html
Jrlee
Posts: 54
Joined: Wed Jan 09, 2019 1:59 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
CNC Control System Serial Number: F045DA798AE4-1119181352
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No
Contact:

Re: Reverting to VCP in version 4.82

Post by Jrlee »

Scott thank you for that. I totally forgot about reading that a few weeks ago.
Jr
Post Reply