Can you please tell when these parts will be available?
This year or next?
Can you tell if it is possible to use a main spindle encoder in full closed loop with Acorn 6?
In C axis operation.
Thanks for the information
Stephan
When will it be?
Moderator: cnckeith
-
- Posts: 7325
- Joined: Wed Mar 03, 2010 4:23 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: Yes
- Oak CNC controller: Yes
- CNC Control System Serial Number: none
- DC3IOB: Yes
- CNC11: Yes
- CPU10 or CPU7: Yes
- Contact:
Re: When will it be?
the AcornSix encoder expansion board is available now in limited quantities, i'm taking photos and getting it up on the website this week.
Need support? READ THIS POST first. http://centroidcncforum.com/viewtopic.php?f=60&t=1043
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html
-
- Posts: 7325
- Joined: Wed Mar 03, 2010 4:23 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: Yes
- Oak CNC controller: Yes
- CNC Control System Serial Number: none
- DC3IOB: Yes
- CNC11: Yes
- CPU10 or CPU7: Yes
- Contact:
Re: When will it be?
part #15330 has been assigned. will start selling in beta mode this week.
adds 6 more encoder ports that can be used for encoders, scale or MPG's
adds 6 more encoder ports that can be used for encoders, scale or MPG's
Need support? READ THIS POST first. http://centroidcncforum.com/viewtopic.php?f=60&t=1043
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html
-
- Posts: 65
- Joined: Thu May 12, 2022 2:13 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
Re: When will it be?
I thank you for your feedback
I thought it would take longer, so I converted my machine to linear rails.
I grind all parts of Z on a surface grinder.
All parts of X were milled on a DMG Morie 5 axis.
I equipped all axles with ball screws.....
Today I tested everything.
My parts have a maximum deviation of 0.02mm but mostly 0.01mm.
Without changing the tool table.
The result is the same when milling in the lathe.
Therefore, I no longer need these upgrades.
Thank you anyway for your information.
Best regards Stephan
I thought it would take longer, so I converted my machine to linear rails.
I grind all parts of Z on a surface grinder.
All parts of X were milled on a DMG Morie 5 axis.
I equipped all axles with ball screws.....
Today I tested everything.
My parts have a maximum deviation of 0.02mm but mostly 0.01mm.
Without changing the tool table.
The result is the same when milling in the lathe.
Therefore, I no longer need these upgrades.
Thank you anyway for your information.
Best regards Stephan