Lenovo Tiny PC Mounting Bracket .stl file

All things related to the Centroid Acorn CNC Controller

Moderator: cnckeith

Post Reply
IPGregory
Posts: 162
Joined: Sat Oct 08, 2022 9:27 pm
Acorn CNC Controller: Yes
Plasma CNC Controller: No
AcornSix CNC Controller: No
Allin1DC CNC Controller: No
Hickory CNC Controller: No
Oak CNC controller: No
CNC Control System Serial Number: 20D7787C45AB-0819226470 - 98F07B6F97F8-0623237343
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No
Location: Nevada, USA

Lenovo Tiny PC Mounting Bracket .stl file

Post by IPGregory »

Made a mounting bracket for my Lenovo M910q ThinkCentre PC. I know a number of people use them as CNC PCs so hopefully this might be useful to somebody.

The bracket fits a PC that is 180mm wide by 34.75mm high by 183.5mm long. It allows mounting to a plate above or below as it fits both ways to the PC. PC slides in form the rear and clips in place.

There is also an optional DIN Rail Mount that clips into the screw holes on the bracket (needs 2). The bracket holes are symmetrical so you can mount it either Vertically or Horizontally on the Rail.

The forum wouldn't allow me to upload the files as .stl, so I renamed them as .txt. To use them just replace the .txt with .stl.
Attachments
M910q Mounting Bracket DIN Clip.txt
(338.17 KiB) Downloaded 1 time
M910q Mounting Bracket.txt
(1.41 MiB) Downloaded 1 time
IMG_2819.jpg
IMG_2815.jpg
IMG_2814.jpg
IMG_2810.jpg
Thx
Ian

QueenAnt Pro V2 - CNC Router - https://photos.app.goo.gl/kg7CSvJsrAvAgRs26
MPNC - CNC Router - https://photos.app.goo.gl/ees2SER6C2Aw8AJ89.
cnckeith
Posts: 7166
Joined: Wed Mar 03, 2010 4:23 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: Yes
Oak CNC controller: Yes
CNC Control System Serial Number: none
DC3IOB: Yes
CNC11: Yes
CPU10 or CPU7: Yes
Contact:

Re: Lenovo Tiny PC Mounting Bracket .stl file

Post by cnckeith »

cool, thanks for posting. -keith
Need support? READ THIS POST first. http://centroidcncforum.com/viewtopic.php?f=60&t=1043
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html
Post Reply