I appreciate all the extra advice you're sharing, and I accept there's always new things to learn.
That said, I have considerable experience in designing and building CNC control systems and believe I've got that side of things covered.
As there seems to be no obvious solution to the two issues I've encountered, I've decided to run with the workaround for now.
Once the new AcornSix solution evolves from beta, I'll be upgrading this machine to the AcornSix.
Troy
Paired Axis Anomaly
Moderator: cnckeith
-
- Posts: 27
- Joined: Thu May 20, 2021 9:57 pm
- Acorn CNC Controller: Yes
- Plasma CNC Controller: No
- AcornSix CNC Controller: Yes
- Allin1DC CNC Controller: No
- Hickory CNC Controller: No
- Oak CNC controller: Yes
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
- Location: Qld, Australia
-
- Posts: 7334
- Joined: Wed Mar 03, 2010 4:23 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: Yes
- Oak CNC controller: Yes
- CNC Control System Serial Number: none
- DC3IOB: Yes
- CNC11: Yes
- CPU10 or CPU7: Yes
- Contact:
Re: Paired Axis Anomaly
would be great to see some photos of your machine.LinkCNC wrote: ↑Wed Apr 05, 2023 5:30 am I appreciate all the extra advice you're sharing, and I accept there's always new things to learn.
That said, I have considerable experience in designing and building CNC control systems and believe I've got that side of things covered.
As there seems to be no obvious solution to the two issues I've encountered, I've decided to run with the workaround for now.
Once the new AcornSix solution evolves from beta, I'll be upgrading this machine to the AcornSix.
Troy
next cnc12 build for AcornSix is a release candidate!
Need support? READ THIS POST first. http://centroidcncforum.com/viewtopic.php?f=60&t=1043
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html