CNC on the cheap. Kai's Techno Router Acorn CNC controller build part list

All things related to the Centroid Acorn CNC Controller

Moderator: cnckeith

Post Reply
cnckeith
Posts: 7166
Joined: Wed Mar 03, 2010 4:23 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: Yes
Oak CNC controller: Yes
CNC Control System Serial Number: none
DC3IOB: Yes
CNC11: Yes
CPU10 or CPU7: Yes
Contact:

CNC on the cheap. Kai's Techno Router Acorn CNC controller build part list

Post by cnckeith »

Kai's Techno Router Acorn CNC controller build part list. CNC on the cheap.
kai_techno.jpg

Leadshine Closed loop stepper motors and drives.

2x CS-M22323-S
1x CS-M22323B
3x CS-D508
3x 3 meter long cables
Brake motor on Z
Motor drive power supply
USB communication cable for communicating with drive


Amazon links to parts used in this build.

Electrical Box
https://amzn.to/3IvBT8P

CNC PC
https://amzn.to/3IuvSZZ

Touch Screen
https://amzn.to/3kl1GY6

Din rail terminal blocks
https://amzn.to/3YZIBtl

Din rail.
https://amzn.to/3xuijU5

Wire Markers
https://amzn.to/3k02zp0

Quick Docking wire connectors
https://amzn.to/3XHZdV7

Din rail terminal block quick connect.
https://amzn.to/3xtgBm1

Dial indicator with mag base.
https://amzn.to/3I6TsLc

Lever nuts connectors.
https://amzn.to/3Ecl00g

more lever nut connectors.
https://amzn.to/3XHL62e

120mm x 25 mm cooling fan
https://amzn.to/3XCiBmw

Electrical box main power rotary switch
https://amzn.to/3S56eyc

6A circuit breakers.
https://amzn.to/3YDAtyC

Push button estop.
https://amzn.to/3I72DLt

DB25 flying lead for easy drive connections.
https://amzn.to/3IaGEDm

Shielded signal cables 22 gauge. two conductor with ground
https://amzn.to/3xpNIY1

Din rail 24 vdc power supply 1 amp
https://amzn.to/3EauXeM

Din rail 24 vdc power supply 3 amp
https://amzn.to/3k1KDKB

Stepper motor to ballscrew coupler
https://amzn.to/3Eghimt

Physical Cycle Start, Feed Hold, Tool Check and estop
https://amzn.to/3YEojWv

Wire track for Z axis cables on gantry.
https://amzn.to/3lJabN7

Fan dust filters
https://amzn.to/3xthUkV

3 foot shielded ethernet cable.
https://amzn.to/3YJllQE

Wire.
https://amzn.to/4103DtB

Wire stripper.
https://amzn.to/3S3PPKy

Small wire stripper. for those tiny db25 wires!
https://amzn.to/3Kb8mmf

alternative.
https://amzn.to/3Id8Cyt

Basic wire stripper
https://amzn.to/3IfrWLt

More gear we use but don't sell is here.
https://www.centroidcnc.com/centroid_di ... _gear.html
Need support? READ THIS POST first. http://centroidcncforum.com/viewtopic.php?f=60&t=1043
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html
mikeintx
Posts: 46
Joined: Wed Jan 25, 2023 9:16 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
CNC Control System Serial Number: 6679
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No

Re: CNC on the cheap. Kai's Techno Router Acorn CNC controller build part list

Post by mikeintx »

Nice! I wish I found that enclosure before buying a Hubbell. Mine is smaller and a lot more expensive. Would be interested to know how he has the relay board suspended above the Acorn?
cnckeith
Posts: 7166
Joined: Wed Mar 03, 2010 4:23 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: Yes
Oak CNC controller: Yes
CNC Control System Serial Number: none
DC3IOB: Yes
CNC11: Yes
CPU10 or CPU7: Yes
Contact:

Re: CNC on the cheap. Kai's Techno Router Acorn CNC controller build part list

Post by cnckeith »

he made a plexi cover for Acorn and put through holes in it to mount the relay 8 board.

you can see it better in this photo.
https://photos.app.goo.gl/PcMdSiCiYUMJqYhY8
Need support? READ THIS POST first. http://centroidcncforum.com/viewtopic.php?f=60&t=1043
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html
cnckeith
Posts: 7166
Joined: Wed Mar 03, 2010 4:23 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: Yes
Oak CNC controller: Yes
CNC Control System Serial Number: none
DC3IOB: Yes
CNC11: Yes
CPU10 or CPU7: Yes
Contact:

Re: CNC on the cheap. Kai's Techno Router Acorn CNC controller build part list

Post by cnckeith »

Kai Techno Router to Acorn photo album
https://photos.app.goo.gl/Ji6PdWYTjLTN687F9

i'll be adding more photos and videos over the coming weeks.
Need support? READ THIS POST first. http://centroidcncforum.com/viewtopic.php?f=60&t=1043
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html
BDubs
Posts: 61
Joined: Sun Dec 24, 2017 11:49 am
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
CNC Control System Serial Number: none
DC3IOB: No
CNC11: No
CPU10 or CPU7: No
Contact:

Re: CNC on the cheap. Kai's Techno Router Acorn CNC controller build part list

Post by BDubs »

Cheaper quality strippers by Klein: https://www.amazon.com/Stripper-Strande ... B000XEUPMQ
Brady Watson | IBILD Solutions | Production Consultant | HiDef 3D Laser Scanning | Vectric Custom Video Training | IBILD.com
mikeintx
Posts: 46
Joined: Wed Jan 25, 2023 9:16 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
CNC Control System Serial Number: 6679
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No

Re: CNC on the cheap. Kai's Techno Router Acorn CNC controller build part list

Post by mikeintx »

cnckeith wrote: Fri Feb 17, 2023 7:38 pm Kai Techno Router to Acorn photo album
https://photos.app.goo.gl/Ji6PdWYTjLTN687F9

i'll be adding more photos and videos over the coming weeks.
Nice! Thanks for sharing the album.
cnckeith
Posts: 7166
Joined: Wed Mar 03, 2010 4:23 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: Yes
Oak CNC controller: Yes
CNC Control System Serial Number: none
DC3IOB: Yes
CNC11: Yes
CPU10 or CPU7: Yes
Contact:

Re: CNC on the cheap. Kai's Techno Router Acorn CNC controller build part list

Post by cnckeith »

BDubs wrote: Fri Feb 17, 2023 10:49 pm Cheaper quality strippers by Klein: https://www.amazon.com/Stripper-Strande ... B000XEUPMQ
good ones! i added to the list.
Need support? READ THIS POST first. http://centroidcncforum.com/viewtopic.php?f=60&t=1043
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html
suntravel
Posts: 1967
Joined: Thu Sep 23, 2021 3:49 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
CNC Control System Serial Number: 6433DB0446C1-08115074
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No
Location: Germany

Re: CNC on the cheap. Kai's Techno Router Acorn CNC controller build part list

Post by suntravel »

for small wires I use this one:

https://amzn.to/4b1eQPl

Uwe
cnckeith
Posts: 7166
Joined: Wed Mar 03, 2010 4:23 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: Yes
Oak CNC controller: Yes
CNC Control System Serial Number: none
DC3IOB: Yes
CNC11: Yes
CPU10 or CPU7: Yes
Contact:

Re: CNC on the cheap. Kai's Techno Router Acorn CNC controller build part list

Post by cnckeith »

I updated the Gear we use but don't sell page with new items and updated links.
https://www.centroidcnc.com/centroid_di ... _gear.html
Need support? READ THIS POST first. http://centroidcncforum.com/viewtopic.php?f=60&t=1043
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html
cnckeith
Posts: 7166
Joined: Wed Mar 03, 2010 4:23 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: Yes
Oak CNC controller: Yes
CNC Control System Serial Number: none
DC3IOB: Yes
CNC11: Yes
CPU10 or CPU7: Yes
Contact:

Re: CNC on the cheap. Kai's Techno Router Acorn CNC controller build part list

Post by cnckeith »

amazon broke all affiliate links that had images world wide! so, i redid the page with static links and added a few and fixed a few others.
https://www.centroidcnc.com/centroid_di ... _gear.html
Need support? READ THIS POST first. http://centroidcncforum.com/viewtopic.php?f=60&t=1043
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html
Post Reply