Hardinge chnc turret
Moderator: cnckeith
-
- Posts: 5
- Joined: Sat Apr 02, 2022 12:26 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: noneT39 2153
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
Hardinge chnc turret
How do you wire and setup turret using acorn. It is a new install
-
- Posts: 7292
- Joined: Wed Mar 03, 2010 4:23 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: Yes
- Oak CNC controller: Yes
- CNC Control System Serial Number: none
- DC3IOB: Yes
- CNC11: Yes
- CPU10 or CPU7: Yes
- Contact:
Re: Hardinge chnc turret
the chnc turret is a sweet turret!
not sure if anyone has done it yet with Acorn, but we did a bunch of them with allin1dc.
the turret documentation we did 20 years ago is here.
https://www.centroidcnc.com/downloads/c ... Manual.pdf
pick up a Ether1616 to go with the Acorn to add the additional i/o you are going to need with the chnc.
not sure if anyone has done it yet with Acorn, but we did a bunch of them with allin1dc.
the turret documentation we did 20 years ago is here.
https://www.centroidcnc.com/downloads/c ... Manual.pdf
pick up a Ether1616 to go with the Acorn to add the additional i/o you are going to need with the chnc.
Need support? READ THIS POST first. http://centroidcncforum.com/viewtopic.php?f=60&t=1043
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html
-
- Posts: 5
- Joined: Sat Apr 02, 2022 12:26 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: noneT39 2153
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
Re: Hardinge chnc turret
How do I designate the inputs and outputs
-
- Posts: 5
- Joined: Sat Apr 02, 2022 12:26 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: noneT39 2153
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
Re: Hardinge chnc turret
How do I designate the inputs and outputs and what parameters need to be changed
-
- Posts: 7292
- Joined: Wed Mar 03, 2010 4:23 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: Yes
- Oak CNC controller: Yes
- CNC Control System Serial Number: none
- DC3IOB: Yes
- CNC11: Yes
- CPU10 or CPU7: Yes
- Contact:
Re: Hardinge chnc turret
download the Acorn atc zip file and look over the instructions.
located in the "All Acorn Documentation" page. here.
https://centroidcncforum.com/viewtopic.php?f=60&t=3397
look for.
Acorn CNC12 v4.80 ATC programs and instructions
located in the "All Acorn Documentation" page. here.
https://centroidcncforum.com/viewtopic.php?f=60&t=3397
look for.
Acorn CNC12 v4.80 ATC programs and instructions
Need support? READ THIS POST first. http://centroidcncforum.com/viewtopic.php?f=60&t=1043
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html
-
- Posts: 5
- Joined: Sat Apr 02, 2022 12:26 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: noneT39 2153
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
Re: Hardinge chnc turret
It tells you to use inputs 1 thru 4 on acorn but they are 24 v this is 12 v so I used inputs on ether 1616 and installed resistors for 12 v Is this the correct way to go