Greetings from the U.K. ! I need some help

All things related to the Centroid Acorn CNC Controller

Moderator: cnckeith

Post Reply
PookiTim
Posts: 3
Joined: Sun Feb 05, 2023 1:49 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
CNC Control System Serial Number: none
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No

Greetings from the U.K. ! I need some help

Post by PookiTim »

Hey Y’all! Greetings from the U.K.

I currently have a Denford 3Axis CNC Mill running Acorn. This Mill is unfortunately Mechanically beyond repair.

I have a Hardinge HXL CNC Lathe that I’m
Hoping to retrofit using the Acorn system from the Mill. Now where I’m stumped is if possible I want to use the Spindle Motor already fitted to the Lathe, from what I can see it is a Braked DC Motor. My mill is using I’m assuming a small AC Motor and VFD Setup.

Some advice on this will be greatly appreciated! The Acorn mill I bought rather than built so it’s a big learning curve for me
Post Reply