Hello,
It may be a silly question,
In F360 there is a chamfer tool path, for CNC12 do I use the Frame cycle as chamfering (first calling the tool) ?
Is there anything else I need to adjust (like cuttercomp) to have 45 deg chamfer on lets say my 1 inch circular part
Thank you for your help.
Chamfer via Intercon
Moderator: cnckeith
-
- Posts: 3072
- Joined: Tue Mar 22, 2016 10:03 am
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: Yes
- Oak CNC controller: Yes
- CNC Control System Serial Number: 100505
100327
102696
103432
7804732B977B-0624192192 - DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
- Location: Boston, MA
- Contact:
Re: Chamfer via Intercon
Pocket and frame routines can be used for chamfering. You will need to adjust the tool diameter and depth.
Last edited by tblough on Sat Feb 04, 2023 5:53 pm, edited 1 time in total.
Cheers,
Tom
Confidence is the feeling you have before you fully understand the situation.
I have CDO. It's like OCD, but the letters are where they should be.
Tom
Confidence is the feeling you have before you fully understand the situation.
I have CDO. It's like OCD, but the letters are where they should be.
-
- Posts: 40
- Joined: Mon Nov 21, 2022 12:51 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
Re: Chamfer via Intercon
Thank you