SpindleCooling_Fan LED <answered>
Moderator: cnckeith
-
- Posts: 667
- Joined: Fri Nov 30, 2018 1:04 pm
- Acorn CNC Controller: Yes
- Plasma CNC Controller: No
- AcornSix CNC Controller: No
- Allin1DC CNC Controller: No
- Hickory CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
- Location: Thorp WI
SpindleCooling_Fan LED <answered>
Is it possible to add a LED for an output definition to the PLC? For example, SpindleCoolingLED is 1129, but there's no SpindleCooling_Fan LED. What I'd like to do, is to have a LED come on when SpindleCooling_Fan output is active. I've done something similar with the "Auto Z to Plate" button and the ToolTouchOffTriggered skin event, but this one's a bit different.
Scott
-
- Posts: 7292
- Joined: Wed Mar 03, 2010 4:23 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: Yes
- Oak CNC controller: Yes
- CNC Control System Serial Number: none
- DC3IOB: Yes
- CNC11: Yes
- CPU10 or CPU7: Yes
- Contact:
Re: SpindleCooling_Fan LED
yes, i'll have chris chime in on how to do that, in meantime post fresh report.zip please.thanks, k
Need support? READ THIS POST first. http://centroidcncforum.com/viewtopic.php?f=60&t=1043
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html
-
- Posts: 135
- Joined: Wed Jul 31, 2019 12:53 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: Yes
- Oak CNC controller: Yes
- CNC Control System Serial Number: none
- DC3IOB: Yes
- CNC12: Yes
- CNC11: Yes
- CPU10 or CPU7: Yes
Re: SpindleCooling_Fan LED
Hello Sword,
It is possible to add a LED Output your self, here is what i would do.
In the acorn_XXX_plc.src (XXX is mill, plasma, router, lathe), can add the following code.
The reason SpindleCooling_Fan does not have an LED already is because it is not activated by an Aux Key, it simply turns on when the spindle is enabled, and disabled when it is turned off (After the timer expires). The SpindleCooling Output is used for situations in which you like more control on when it is active, it can be activated either by a VCP Button or by M-Code command, thus has a LED already that is used for the VCP Button.
It is possible to add a LED Output your self, here is what i would do.
In the acorn_XXX_plc.src (XXX is mill, plasma, router, lathe), can add the following code.
Code: Select all
;Add Following to Output Definitions section of PLC
SpindleCoolingFanLED IS OUT1141 ;Ensure this Output is not used already in your PLC.
;Following is Found in the MainStage of PLC
;SpindleCooling_Fan
;Turn SpindleCooling_Fan on anytime Spindle is Enabled
IF True THEN SpindleCooling_T = SV_MACHINE_PARAMETER_997 * 1000
IF SpindleEnableOut_M THEN SET SpindleCooling_Fan, RST SpindleCooling_T
IF !SpindleEnableOut_M THEN SET SpindleCooling_T
IF SpindleCooling_T THEN RST SpindleCooling_Fan
IF SpindleCooling_Fan THEN (SpindleCoolingFanLED) ;Add this line to activate LED when fan is on
When requesting support READ THIS POST first. http://centroidcncforum.com/viewtopic.php?f=60&t=1043
Please ALWAYS post a FRESH report. To make a report: https://www.youtube.com/watch?v=Ecvg0VJp1oQ.
(We pride ourselves on providing timely solid technical support but, without good information we may not be able to help and/or reply until such information is posted.)
Centroid PLC Tutorial Videos
Please ALWAYS post a FRESH report. To make a report: https://www.youtube.com/watch?v=Ecvg0VJp1oQ.
(We pride ourselves on providing timely solid technical support but, without good information we may not be able to help and/or reply until such information is posted.)
Centroid PLC Tutorial Videos
-
- Posts: 667
- Joined: Fri Nov 30, 2018 1:04 pm
- Acorn CNC Controller: Yes
- Plasma CNC Controller: No
- AcornSix CNC Controller: No
- Allin1DC CNC Controller: No
- Hickory CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
- Location: Thorp WI
Re: SpindleCooling_Fan LED
Thanks Chris! Easy-peasy, it works perfectly! Kind of what I thought needed to be done, but wasn't sure.
YT Short showing it with a 5 sec delay.
https://youtube.com/shorts/eBBG6VfGqao?feature=share
YT Short showing it with a 5 sec delay.
https://youtube.com/shorts/eBBG6VfGqao?feature=share
Scott