I would think this is better, estop should turn it off. Hopefully this can be added to 5.0cncsnw wrote: ↑Fri Jan 27, 2023 4:40 pm ... and, if it is still desired to turn off the laser in case of Fault or Emergency Stop:Code: Select all
;LaserAlignActivate IF SkinLaserAlign_M THEN (LaserAlignPD) IF (LaserAlignPD ^ LaserAlignActivate_SV) && !SV_STOP THEN (LaserAlignActivate_SV) IF LaserAlignActivate_SV THEN (LaserAlignActivate), (LaserAlignLED)
Activate Laser M76func issue
Moderator: cnckeith
-
- Posts: 25
- Joined: Sun Feb 20, 2022 2:22 am
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
Re: Activate Laser M76func issue
-
- Posts: 7325
- Joined: Wed Mar 03, 2010 4:23 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: Yes
- Oak CNC controller: Yes
- CNC Control System Serial Number: none
- DC3IOB: Yes
- CNC11: Yes
- CPU10 or CPU7: Yes
- Contact:
Re: Activate Laser M76func issue
cryptonym, for the CNC PC being used what are the PC specs?
Need support? READ THIS POST first. http://centroidcncforum.com/viewtopic.php?f=60&t=1043
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html