Hey, We have a Gauss 1325 CNC router hooked up with an Acorn CNC controller.
We are using Fusion360 and have a model in which we have rigged up to simulate our Gauss CNC machine.
When we simulate in fusion360 it gives us an error saying: "Post Processor not compatible with machine simulation. Simulating without a machine.
is there a way to edit or get a new Centroid post processor that works in Fusion360?
https://cam.autodesk.com/hsmposts
https://cam.autodesk.com/posts/post.php?name=centroid
Fusion 360 Post Processor not compatible with machine simulation
Moderator: cnckeith
-
- Posts: 7363
- Joined: Wed Mar 03, 2010 4:23 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: Yes
- Oak CNC controller: Yes
- CNC Control System Serial Number: none
- DC3IOB: Yes
- CNC11: Yes
- CPU10 or CPU7: Yes
- Contact:
Re: Fusion 360 Post Processor not compatible with machine simulation
send an amazon gift card to swissi to look into it.scott3d wrote: ↑Thu Jan 19, 2023 4:48 pm Hey, We have a Gauss 1325 CNC router hooked up with an Acorn CNC controller.
We are using Fusion360 and have a model in which we have rigged up to simulate our Gauss CNC machine.
When we simulate in fusion360 it gives us an error saying: "Post Processor not compatible with machine simulation. Simulating without a machine.
is there a way to edit or get a new Centroid post processor that works in Fusion360?
https://cam.autodesk.com/hsmposts
https://cam.autodesk.com/posts/post.php?name=centroid
Need support? READ THIS POST first. http://centroidcncforum.com/viewtopic.php?f=60&t=1043
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html
-
- Posts: 573
- Joined: Wed Aug 29, 2018 11:15 am
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: 985DADEB24D5-0309180716
- DC3IOB: No
- CNC11: No
- CPU10 or CPU7: No
Re: Fusion 360 Post Processor not compatible with machine simulation
I'm still working on the version that supports simulation of a rotational axis. If you are just looking for X,Y,Z axes simulation contact me at the email address below in my signature.scott3d wrote: ↑Thu Jan 19, 2023 4:48 pm Hey, We have a Gauss 1325 CNC router hooked up with an Acorn CNC controller.
We are using Fusion360 and have a model in which we have rigged up to simulate our Gauss CNC machine.
When we simulate in fusion360 it gives us an error saying: "Post Processor not compatible with machine simulation. Simulating without a machine.
is there a way to edit or get a new Centroid post processor that works in Fusion360?
https://cam.autodesk.com/hsmposts
https://cam.autodesk.com/posts/post.php?name=centroid
-swissi
If you are using Fusion 360, check out my CNC12 specific Post Processor
If you are using a Touch Probe, Tool Touch Off Device or a Triple Corner Finder Plate, check out my ProbeApp
Contact me at swissi2000@gmail.com
If you are using a Touch Probe, Tool Touch Off Device or a Triple Corner Finder Plate, check out my ProbeApp
Contact me at swissi2000@gmail.com