make a photo / video google album and post link here so we can see the machine/ control and parts being made!seeheartouch wrote: ↑Mon Jan 30, 2023 5:58 pm You have the eagle eye ShawnM, wow - that was it!
(sorry for the long tardy reply, I thought I had replied but was logged out and didn't realize it at the time...)
Thanks all for their help, we're up and running as expected, finally
Build Thread - Acorn DIY 5'x10' CNC Mod
Moderator: cnckeith
-
- Posts: 7327
- Joined: Wed Mar 03, 2010 4:23 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: Yes
- Oak CNC controller: Yes
- CNC Control System Serial Number: none
- DC3IOB: Yes
- CNC11: Yes
- CPU10 or CPU7: Yes
- Contact:
Re: Build Thread - Acorn DIY 5'x10' CNC Mod
Need support? READ THIS POST first. http://centroidcncforum.com/viewtopic.php?f=60&t=1043
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html
-
- Posts: 2232
- Joined: Fri May 24, 2019 8:34 am
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: 7804734C6498-0401191832
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
- Location: Clearwater, FL
Re: Build Thread - Acorn DIY 5'x10' CNC Mod
You did reply already and then so did I but there was an issue with the forum server and posts were lost/erased.seeheartouch wrote: ↑Mon Jan 30, 2023 5:58 pm You have the eagle eye ShawnM, wow - that was it!
(sorry for the long tardy reply, I thought I had replied but was logged out and didn't realize it at the time...)
Thanks all for their help, we're up and running as expected, finally
Glad you got it all working. As Keith stated, please start a google photo album so we can see the machine and your work.
-
- Posts: 12
- Joined: Mon Nov 28, 2022 11:50 am
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: 0CB2B7D9220B-1113203953
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
Re: Build Thread - Acorn DIY 5'x10' CNC Mod
Back from an Ecuadorian vacation (hence the silence) but I wanted to follow up and note that I do have a google photos link in the first post of this thread, should have the looks to help folks understand further!
Thanks again errybody!
Thanks again errybody!
Artist and Educator
-
- Posts: 7327
- Joined: Wed Mar 03, 2010 4:23 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: Yes
- Oak CNC controller: Yes
- CNC Control System Serial Number: none
- DC3IOB: Yes
- CNC11: Yes
- CPU10 or CPU7: Yes
- Contact:
Re: Build Thread - Acorn DIY 5'x10' CNC Mod
Need support? READ THIS POST first. http://centroidcncforum.com/viewtopic.php?f=60&t=1043
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html
-
- Posts: 7327
- Joined: Wed Mar 03, 2010 4:23 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: Yes
- Oak CNC controller: Yes
- CNC Control System Serial Number: none
- DC3IOB: Yes
- CNC11: Yes
- CPU10 or CPU7: Yes
- Contact:
Re: Build Thread - Acorn DIY 5'x10' CNC Mod
please make sure you are using the latest release of CNC12 software which is v4.82 (the report and screen shots are from v4.50) there has been a lot of changes and improvements since v4.50.
its free, download here.
https://www.centroidcnc.com/centroid_di ... loads.html
and post photos of the machine and control cabinet in the google album
its free, download here.
https://www.centroidcnc.com/centroid_di ... loads.html
and post photos of the machine and control cabinet in the google album
Need support? READ THIS POST first. http://centroidcncforum.com/viewtopic.php?f=60&t=1043
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html