DRO display

All things related to the Centroid Acorn CNC Controller

Moderator: cnckeith

Post Reply
avp
Posts: 124
Joined: Fri Aug 13, 2021 12:25 pm
Acorn CNC Controller: Yes
Plasma CNC Controller: No
AcornSix CNC Controller: No
Allin1DC CNC Controller: No
Hickory CNC Controller: No
Oak CNC controller: No
CNC Control System Serial Number: E062346A1C67-0716214939
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No
Location: New York

DRO display

Post by avp »

Hello all,
One of the things I like about the recent updates to cnc12 is the ability to limit the displayed DRO's to 3 decimal places. On a router I have no need for 4 decimal places.
My question is: Is there a way to set three decimal places for the displayed DRO's when in the graph view as well?
Bill
suntravel
Posts: 1967
Joined: Thu Sep 23, 2021 3:49 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
CNC Control System Serial Number: 6433DB0446C1-08115074
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No
Location: Germany

Re: DRO display

Post by suntravel »

You can change it in the Wizard

Uwe
Attachments
w11.jpg
avp
Posts: 124
Joined: Fri Aug 13, 2021 12:25 pm
Acorn CNC Controller: Yes
Plasma CNC Controller: No
AcornSix CNC Controller: No
Allin1DC CNC Controller: No
Hickory CNC Controller: No
Oak CNC controller: No
CNC Control System Serial Number: E062346A1C67-0716214939
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No
Location: New York

Re: DRO display

Post by avp »

Yes, I do have it set that way, however when in the graph view 4 decimal places are still displayed. That seems to only affect the main DRO display.
suntravel
Posts: 1967
Joined: Thu Sep 23, 2021 3:49 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
CNC Control System Serial Number: 6433DB0446C1-08115074
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No
Location: Germany

Re: DRO display

Post by suntravel »

I check on my machine later...

Uwe
cnckeith
Posts: 7166
Joined: Wed Mar 03, 2010 4:23 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: Yes
Oak CNC controller: Yes
CNC Control System Serial Number: none
DC3IOB: Yes
CNC11: Yes
CPU10 or CPU7: Yes
Contact:

Re: DRO display

Post by cnckeith »

i confirmed this annoyance is in v4.80 and v4.82 RC2. will fix and post a v4.82 RC3
Need support? READ THIS POST first. http://centroidcncforum.com/viewtopic.php?f=60&t=1043
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html
suntravel
Posts: 1967
Joined: Thu Sep 23, 2021 3:49 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
CNC Control System Serial Number: 6433DB0446C1-08115074
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No
Location: Germany

Re: DRO display

Post by suntravel »

on my mill and metric units, it sets 3 digits correctly.

Screenshot 4.82 RC2

Uwe
Attachments
3digit.jpg
cnckeith
Posts: 7166
Joined: Wed Mar 03, 2010 4:23 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: Yes
Oak CNC controller: Yes
CNC Control System Serial Number: none
DC3IOB: Yes
CNC11: Yes
CPU10 or CPU7: Yes
Contact:

Re: DRO display

Post by cnckeith »

ok, thanks . i was using "Router" version for my tests. i've asked the crew to look into it.
Need support? READ THIS POST first. http://centroidcncforum.com/viewtopic.php?f=60&t=1043
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html
Post Reply