Page 1 of 1
Taizhou servo question
Posted: Thu Dec 01, 2022 2:12 pm
by danno067
When hooking acorn up to these drives, if I'm understanding correctly, pin 3=+pulse, pin 14= --pulse, pin 4= +dir., pin 5= --dir.? I'm not sure if I'm right here. Attached is the pin out that I have of the communication port.
Re: Taizhou servo question
Posted: Sun Dec 04, 2022 9:39 pm
by danno067
Add to edit. This is the "standard" version of the pin out.
Re: Taizhou servo question
Posted: Wed Dec 07, 2022 12:19 pm
by Centroid_Tech2
A more complete manual or even a complete drive name and model number would be helpful.
But looking at the information provided, I would say you're correct about the pin numbers.
Re: Taizhou servo question
Posted: Wed Dec 07, 2022 10:11 pm
by danno067
Hope this works. Model is 110st-m06030lb. Made by Taizhou Yichuan Electric Co.