Taizhou servo question
Moderator: cnckeith
-
- Posts: 11
- Joined: Sun Nov 27, 2022 11:59 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
Taizhou servo question
When hooking acorn up to these drives, if I'm understanding correctly, pin 3=+pulse, pin 14= --pulse, pin 4= +dir., pin 5= --dir.? I'm not sure if I'm right here. Attached is the pin out that I have of the communication port.
-
- Posts: 11
- Joined: Sun Nov 27, 2022 11:59 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
Re: Taizhou servo question
Add to edit. This is the "standard" version of the pin out.
-
- Posts: 100
- Joined: Mon Mar 03, 2014 4:24 pm
- Allin1DC CNC Controller: Yes
- CNC Control System Serial Number: none
- DC3IOB: Yes
- CNC11: Yes
- CPU10 or CPU7: Yes
Re: Taizhou servo question
A more complete manual or even a complete drive name and model number would be helpful.
But looking at the information provided, I would say you're correct about the pin numbers.
But looking at the information provided, I would say you're correct about the pin numbers.
When requesting support READ THIS POST first. viewtopic.php?f=60&t=1043
Please ALWAYS post a FRESH report. To make a report: https://www.youtube.com/watch?v=Ecvg0VJp1oQ.
(We pride ourselves on providing timely solid technical support but, without good information we may not be able to help and/or reply until such information is posted.)
Please ALWAYS post a FRESH report. To make a report: https://www.youtube.com/watch?v=Ecvg0VJp1oQ.
(We pride ourselves on providing timely solid technical support but, without good information we may not be able to help and/or reply until such information is posted.)
-
- Posts: 11
- Joined: Sun Nov 27, 2022 11:59 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
Re: Taizhou servo question
Hope this works. Model is 110st-m06030lb. Made by Taizhou Yichuan Electric Co.