Taizhou servo question

All things related to the Centroid Acorn CNC Controller

Moderator: cnckeith

Post Reply
danno067
Posts: 11
Joined: Sun Nov 27, 2022 11:59 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
CNC Control System Serial Number: none
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No

Taizhou servo question

Post by danno067 »

When hooking acorn up to these drives, if I'm understanding correctly, pin 3=+pulse, pin 14= --pulse, pin 4= +dir., pin 5= --dir.? I'm not sure if I'm right here. Attached is the pin out that I have of the communication port.
AAservousermanualv6_3_221201_120103_31.jpg
AAservousermanualv6_3_221201_120103_30.jpg
danno067
Posts: 11
Joined: Sun Nov 27, 2022 11:59 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
CNC Control System Serial Number: none
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No

Re: Taizhou servo question

Post by danno067 »

AAservousermanualv6_3_221201_120103_29.jpg
AAservousermanualv6_3_221201_120103_28.jpg
Add to edit. This is the "standard" version of the pin out.
Centroid_Tech2
Posts: 97
Joined: Mon Mar 03, 2014 4:24 pm
Allin1DC CNC Controller: Yes
CNC Control System Serial Number: none
DC3IOB: Yes
CNC11: Yes
CPU10 or CPU7: Yes

Re: Taizhou servo question

Post by Centroid_Tech2 »

A more complete manual or even a complete drive name and model number would be helpful.
But looking at the information provided, I would say you're correct about the pin numbers.
When requesting support READ THIS POST first. viewtopic.php?f=60&t=1043

Please ALWAYS post a FRESH report. To make a report: https://www.youtube.com/watch?v=Ecvg0VJp1oQ.

(We pride ourselves on providing timely solid technical support but, without good information we may not be able to help and/or reply until such information is posted.)
danno067
Posts: 11
Joined: Sun Nov 27, 2022 11:59 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
CNC Control System Serial Number: none
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No

Re: Taizhou servo question

Post by danno067 »

__AA____servousermanualv6.3.pdf
(5.56 MiB) Downloaded 12 times
Hope this works. Model is 110st-m06030lb. Made by Taizhou Yichuan Electric Co.
Post Reply