Strange probing behavior

All things related to the Centroid Acorn CNC Controller

Moderator: cnckeith

suntravel
Posts: 1967
Joined: Thu Sep 23, 2021 3:49 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
CNC Control System Serial Number: 6433DB0446C1-08115074
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No
Location: Germany

Re: Strange probing behavior

Post by suntravel »

What do you mean with CNC12 crashes? No response, or shuts it down?

I had never this problem, CNC was allways working.
CNCMaryland
Posts: 369
Joined: Thu Nov 15, 2018 10:07 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
CNC Control System Serial Number: F045DA7CBF8b-103011290
DC3IOB: No
CNC11: No
CPU10 or CPU7: No

Re: Strange probing behavior

Post by CNCMaryland »

If you're asking me, it will fully crash the program. It will instantly shutdown to desktop. I have a video I posted of it.
suntravel
Posts: 1967
Joined: Thu Sep 23, 2021 3:49 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
CNC Control System Serial Number: 6433DB0446C1-08115074
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No
Location: Germany

Re: Strange probing behavior

Post by suntravel »

CNCMaryland wrote: Fri Dec 02, 2022 11:16 am If you're asking me, it will fully crash the program. It will instantly shutdown to desktop. I have a video I posted of it.
Do you have a link to the video?

If this happens is there still heartbeat on the Acorn?

Uwe
CNCMaryland
Posts: 369
Joined: Thu Nov 15, 2018 10:07 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
CNC Control System Serial Number: F045DA7CBF8b-103011290
DC3IOB: No
CNC11: No
CPU10 or CPU7: No

Re: Strange probing behavior

Post by CNCMaryland »

suntravel wrote: Fri Dec 02, 2022 1:00 pm
CNCMaryland wrote: Fri Dec 02, 2022 11:16 am If you're asking me, it will fully crash the program. It will instantly shutdown to desktop. I have a video I posted of it.
Do you have a link to the video?

If this happens is there still heartbeat on the Acorn?

Uwe
https://centroidcncforum.com/viewtopic. ... 4&start=60

Yes, nothing is wrong with the Acorn Hardware. There is a software glitch. Resolved by full re-install.
Post Reply