Fuji VFD connections

All things related to the Centroid Acorn CNC Controller

Moderator: cnckeith

Post Reply
danno067
Posts: 11
Joined: Sun Nov 27, 2022 11:59 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
CNC Control System Serial Number: none
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No

Fuji VFD connections

Post by danno067 »

This is my first cnc build so any help is greatly appreciated. I'm trying to figure out the vfd connections.
I'm using a Fuji FRN0012C2S-2U. From what I am understanding in the manual pin 11 would be for the analog gnd, and pin 12 would be analog out. Also I think 30B and 30C would be the fault relay. I'm confused where to connect for the fault reset. I'm posting a link to the fuji manual, hope it works.
https://www.google.com/url?sa=t&source= ... tKloJb0RG5
cnckeith
Posts: 7164
Joined: Wed Mar 03, 2010 4:23 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: Yes
Oak CNC controller: Yes
CNC Control System Serial Number: none
DC3IOB: Yes
CNC11: Yes
CPU10 or CPU7: Yes
Contact:

Re: Fuji VFD connections

Post by cnckeith »

i moved this post to the Acorn Forum.
Need support? READ THIS POST first. http://centroidcncforum.com/viewtopic.php?f=60&t=1043
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html
Centroid_Tech2
Posts: 97
Joined: Mon Mar 03, 2014 4:24 pm
Allin1DC CNC Controller: Yes
CNC Control System Serial Number: none
DC3IOB: Yes
CNC11: Yes
CPU10 or CPU7: Yes

Re: Fuji VFD connections

Post by Centroid_Tech2 »

I think you have most of the connections figured out. According to the manual X3 is by default
programmed to be the fault reset. I'm attaching a draft schematic of the connections described in the manual.
Attachments
FUJI_FRENIC-Mini-DRAFT.pdf
(155.06 KiB) Downloaded 17 times
When requesting support READ THIS POST first. viewtopic.php?f=60&t=1043

Please ALWAYS post a FRESH report. To make a report: https://www.youtube.com/watch?v=Ecvg0VJp1oQ.

(We pride ourselves on providing timely solid technical support but, without good information we may not be able to help and/or reply until such information is posted.)
cnckeith
Posts: 7164
Joined: Wed Mar 03, 2010 4:23 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: Yes
Oak CNC controller: Yes
CNC Control System Serial Number: none
DC3IOB: Yes
CNC11: Yes
CPU10 or CPU7: Yes
Contact:

Re: Fuji VFD connections

Post by cnckeith »

thanks Chuck!
Need support? READ THIS POST first. http://centroidcncforum.com/viewtopic.php?f=60&t=1043
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html
danno067
Posts: 11
Joined: Sun Nov 27, 2022 11:59 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
CNC Control System Serial Number: none
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No

Re: Fuji VFD connections

Post by danno067 »

Thank you very much. Sorry about posting in the wrong forum.
Post Reply