Open Collector vs. DB25 for SERVO DRIVE

All things related to the Centroid Acorn CNC Controller

Moderator: cnckeith

Post Reply
Salted_Pork
Posts: 3
Joined: Thu Mar 07, 2024 8:03 pm
Acorn CNC Controller: Yes
Plasma CNC Controller: No
AcornSix CNC Controller: No
Allin1DC CNC Controller: No
Hickory CNC Controller: No
Oak CNC controller: No
CNC Control System Serial Number: 54453804251C-0118247882
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No

Re: Open Collector vs. DB25 for SERVO DRIVE

Post by Salted_Pork »

Hey PDS150,

Im in the same situation you were, got my Blue Elephant Chinese router and quickly realized Mach3 and that control board were not gonna cut it!
I have the same motor drives as you, so after reading this post I ordered the DB25 breakout board and I'm going to try and hook everything up on monday.

What Schematic did you use to hook up the DB25 to the drives?

Has everything been working on yours?

Thanks!
Top
cnckeith
Posts: 7334
Joined: Wed Mar 03, 2010 4:23 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: Yes
Oak CNC controller: Yes
CNC Control System Serial Number: none
DC3IOB: Yes
CNC11: Yes
CPU10 or CPU7: Yes
Contact:
Contact cnckeith

Re: Open Collector vs. DB25 for SERVO DRIVE

Post by cnckeith »

this one would probably work.
https://www.centroidcnc.com/dealersuppo ... 032.r2.pdf
Need support? READ THIS POST first. http://centroidcncforum.com/viewtopic.php?f=60&t=1043
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html
Top
Post Reply

Return to “Centroid Acorn CNC Controller”