Spindle Benchtest

All things related to the Centroid Acorn CNC Controller

Moderator: cnckeith

Post Reply
JayF
Posts: 16
Joined: Thu Dec 16, 2021 9:24 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
CNC Control System Serial Number: none
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: Yes

Spindle Benchtest

Post by JayF »

Started the benchtest went through the steps and got a error for not setting the max spindle speed to 3000, Changed it to 3000 restarted cnc12 and tried to run the test agiain is says (Bench test appears to be partially completed) So I pressed 1 to continue and I get a (Block N4 not found line 67) I do a press 0 to start over and I get the same Block not found message and I cant get pass this, cycled acorn and restarted cnc12 and get the same message
Attachments
report_E0623464B717-0628226384_2022-09-30_07-51-09.zip
(781.34 KiB) Downloaded 3 times
308362307_632974228477997_4150260963591827551_n.jpg
308945809_430258839174623_7823092812868781028_n.jpg
308885110_618453083109860_7206775777609040646_n (1).jpg
308354333_596462682268540_4997430622595939904_n.jpg
cnckeith
Posts: 7166
Joined: Wed Mar 03, 2010 4:23 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: Yes
Oak CNC controller: Yes
CNC Control System Serial Number: none
DC3IOB: Yes
CNC11: Yes
CPU10 or CPU7: Yes
Contact:

Re: Spindle Benchtest

Post by cnckeith »

Press zero to start over.
Set your minimum speed as well.
Need support? READ THIS POST first. http://centroidcncforum.com/viewtopic.php?f=60&t=1043
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html
Post Reply