Ether1616 expansion board Fault

All things related to the Centroid Acorn CNC Controller

Moderator: cnckeith

tblough
Posts: 3072
Joined: Tue Mar 22, 2016 10:03 am
Acorn CNC Controller: Yes
Allin1DC CNC Controller: Yes
Oak CNC controller: Yes
CNC Control System Serial Number: 100505
100327
102696
103432
7804732B977B-0624192192
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No
Location: Boston, MA
Contact:

Re: Ether1616 expansion board Fault

Post by tblough »

I'm assuming you've looked at the two previous threads where this has happened?

https://centroidcncforum.com/viewtopic. ... +not+found
https://centroidcncforum.com/viewtopic. ... +not+found
Cheers,

Tom
Confidence is the feeling you have before you fully understand the situation.
I have CDO. It's like OCD, but the letters are where they should be.
DLAM
Posts: 144
Joined: Thu Nov 22, 2018 6:27 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: Yes
Oak CNC controller: No
CNC Control System Serial Number: none
DC3IOB: No
CNC12: Yes
CNC11: Yes
CPU10 or CPU7: No

Re: Ether1616 expansion board Fault

Post by DLAM »

I went back and re read the topics that where pointed out to make sure I didn't miss anything. The machine has been working fine until a week ago when I got a message that ether1616 was offline. Also auto connect issue in regards to communication does not explain what is pulling the power supply down. So the auto connect issue I don't think applies.
Post Reply