All things related to the Centroid Acorn CNC Controller
Moderator: cnckeith
adross809
Posts: 12 Joined: Mon Sep 26, 2022 11:49 am
Acorn CNC Controller: No
Allin1DC CNC Controller: No
Oak CNC controller: No
CNC Control System Serial Number: none
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No
Post
by adross809 » Wed Sep 28, 2022 1:26 pm
cnckeith wrote: ↑ Wed Sep 28, 2022 1:06 pm
link is bad.
750 watt is just fine for a 5 turns per inch knee mill.
https://photos.google.com/album/AF1QipN ... SsJd7_-q0r
maybe itll work that time? so it is fine ? good deal ,now will it be fine for using the knee as the z? ive seen some guys useing gas pistons to help out with the weight of the knee .
cnckeith
Posts: 7292 Joined: Wed Mar 03, 2010 4:23 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: Yes
Oak CNC controller: Yes
CNC Control System Serial Number: none
DC3IOB: Yes
CNC11: Yes
CPU10 or CPU7: Yes
Contact:
Post
by cnckeith » Wed Sep 28, 2022 1:33 pm
z knee is a pitfall unless done right ($)
750 wont cut it on the knee, even with counter balance.
w knee works better
cnckeith
Posts: 7292 Joined: Wed Mar 03, 2010 4:23 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: Yes
Oak CNC controller: Yes
CNC Control System Serial Number: none
DC3IOB: Yes
CNC11: Yes
CPU10 or CPU7: Yes
Contact:
Post
by cnckeith » Wed Sep 28, 2022 1:36 pm
link is bad
hit share button on google photos, then copy that link.
adross809
Posts: 12 Joined: Mon Sep 26, 2022 11:49 am
Acorn CNC Controller: No
Allin1DC CNC Controller: No
Oak CNC controller: No
CNC Control System Serial Number: none
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No
Post
by adross809 » Wed Sep 28, 2022 3:06 pm
adross809
Posts: 12 Joined: Mon Sep 26, 2022 11:49 am
Acorn CNC Controller: No
Allin1DC CNC Controller: No
Oak CNC controller: No
CNC Control System Serial Number: none
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No
Post
by adross809 » Wed Sep 28, 2022 3:07 pm
alrighty ,ill have to fingure out how to get the knee to stay put then .
adross809
Posts: 12 Joined: Mon Sep 26, 2022 11:49 am
Acorn CNC Controller: No
Allin1DC CNC Controller: No
Oak CNC controller: No
CNC Control System Serial Number: none
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No
Post
by adross809 » Wed Sep 28, 2022 3:52 pm
gotcha , looks like ill have to fingure out putting a servo on the quill and finding a way to be able to manually move the knee