Page 1 of 1
old centriod servos
Posted: Mon Sep 26, 2022 12:01 pm
by adross809
just bought a old bridgeport that was cnc converted . it has old centriod motors on it was hoping someone could id these and let me know if theyd work with the new acorn controllers
Re: old centriod servos
Posted: Mon Sep 26, 2022 12:43 pm
by eng199
That looks like the 1350 oz/in motor that had a maximum current of 10A. ACORN doesn't include stepper drives. A stepper drive is needed between the ACORN and motor.
Re: old centriod servos
Posted: Mon Sep 26, 2022 2:24 pm
by adross809
thank you ,ill see if i can start tracking one down
Re: old centriod servos
Posted: Mon Sep 26, 2022 4:51 pm
by adross809
eng199 wrote: ↑Mon Sep 26, 2022 12:43 pm
That looks like the 1350 oz/in motor that had a maximum current of 10A. ACORN doesn't include stepper drives. A stepper drive is needed between the ACORN and motor.
was looking at the acorns controller and says it can run the step motors . do you know what kinda drive id need for those motors?
Re: old centriod servos
Posted: Mon Sep 26, 2022 5:53 pm
by cnckeith
look at leadshine drives or gecko drives, send them specs on the motor and they will recommend a drive that works with it.