Centroid Community CNC Support Forum

Posted: **Sun Sep 25, 2022 6:00 pm**

Made a custom base for an natural sharpening stone.

No CAM used, but the old Centroid Mold Magic, that is easy and fast for such kind of job.

Uwe

Posted: **Mon Sep 26, 2022 6:05 pm**

nice example of Centroid grid digitizing use, thanks for posting.

Posted: **Tue Sep 27, 2022 2:20 pm**

By the way mold magic runs with Win10 too.

It is a great tool for jobs like this, under 60s work to generate an inverted file with different diameter mill an with roughing and finishing.

Had some air cuts, but better 5min air cuts as working hours with meshmixer and fusion

Air cuts came because my probing depth was deeper than the cut i needed...

Uwe

Posted: **Tue Sep 27, 2022 3:30 pm**

I found a post with a link to the Mold Magic Program https://centroidcncforum.com/viewtopic. ... gic#p57914
Any words of wisdom before I load it up and try it?

Posted: **Tue Sep 27, 2022 3:35 pm**

lavrgs wrote: ↑Tue Sep 27, 2022 3:30 pm I found a post with a link to the Mold Magic Program https://centroidcncforum.com/viewtopic. ... gic#p57914
Any words of wisdom before I load it up and try it?

that should work.....

... at your own risk

Uwe

Posted: **Tue Sep 27, 2022 3:50 pm**

lavrgs wrote: ↑Tue Sep 27, 2022 3:30 pm

... at your own risk

Uwe

Always

Posted: **Tue Sep 27, 2022 3:57 pm**

suntravel wrote: ↑Tue Sep 27, 2022 2:20 pm By the way mold magic runs with Win10 too.

It is a great tool for jobs like this, under 60s work to generate an inverted file with different diameter mill an with roughing and finishing.

Had some air cuts, but better 5min air cuts as working hours with meshmixer and fusion

Air cuts came because my probing depth was deeper than the cut i needed...

Uwe

we need to free up some programmer time to rewrite that great program! I use Rhino to make curve offsets now but would be nice to have an updated version of Mold Magic... After AcornSix and Hickory!

Centroid Community CNC Support Forum

Reverse engineering with probing cycle

Reverse engineering with probing cycle

Re: Reverse engineering with probing cycle

Re: Reverse engineering with probing cycle

Re: Reverse engineering with probing cycle

Re: Reverse engineering with probing cycle

Re: Reverse engineering with probing cycle

Re: Reverse engineering with probing cycle