I am retrofitting a Grizzly mill using Centroid Acorn. Spindle Bench test went fine, got everything up and running minus the spindle control. Started working on that with a KBSI-240D, was getting 9.99 volts from Acorn then something happened (maybe some smoke left?) Now, everything seems to work EXCEPT the analog spindle output. I have attached all the things I think I am supposed to but my first post so let me know what I missed.
My question is: Is this a fixable issue or board replacement? Ultimately I do want spindle control but can get by without it for now.
Thanks!
No Spindle Output Centroid Acorn
Moderator: cnckeith
-
dlewis69
- Posts: 5
- Joined: Tue Aug 23, 2022 4:19 am
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- MPU11 & GPIO4D -w/ 3rd Party Drives: No
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
- CNC Control System Serial Number: none
No Spindle Output Centroid Acorn
- Attachments
-
-
-
- report_E0623479525F-0624226300_2022-09-20_08-42-07.zip
- (892.93 KiB) Downloaded 2 times
-
tblough
- Posts: 2738
- Joined: Tue Mar 22, 2016 10:03 am
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: Yes
- Oak CNC controller: Yes
- MPU11 & GPIO4D -w/ 3rd Party Drives: Yes
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
- CNC Control System Serial Number: 100505
100327
102696
103432
7804732B977B-0624192192 - Location: Boston, MA
- Contact:
Re: No Spindle Output Centroid Acorn
Answered in your previous post: https://centroidcncforum.com/viewtopic. ... 1&start=90
Cheers,
Tom
Confidence is the feeling you have before you fully understand the situation.
I have CDO. It's like OCD, but the letters are where they should be.
Tom
Confidence is the feeling you have before you fully understand the situation.
I have CDO. It's like OCD, but the letters are where they should be.