No Spindle Output Centroid Acorn

All things related to the Centroid Acorn CNC Controller

Moderator: cnckeith

Post Reply
dlewis69
Posts: 5
Joined: Tue Aug 23, 2022 4:19 am
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
CNC Control System Serial Number: none
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No

No Spindle Output Centroid Acorn

Post by dlewis69 »

I am retrofitting a Grizzly mill using Centroid Acorn. Spindle Bench test went fine, got everything up and running minus the spindle control. Started working on that with a KBSI-240D, was getting 9.99 volts from Acorn then something happened (maybe some smoke left?) Now, everything seems to work EXCEPT the analog spindle output. I have attached all the things I think I am supposed to but my first post so let me know what I missed.

My question is: Is this a fixable issue or board replacement? Ultimately I do want spindle control but can get by without it for now.

Thanks!
Attachments
20220920_131614.jpg
20220920_131610.jpg
report_E0623479525F-0624226300_2022-09-20_08-42-07.zip
(892.93 KiB) Downloaded 3 times
tblough
Posts: 3072
Joined: Tue Mar 22, 2016 10:03 am
Acorn CNC Controller: Yes
Allin1DC CNC Controller: Yes
Oak CNC controller: Yes
CNC Control System Serial Number: 100505
100327
102696
103432
7804732B977B-0624192192
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No
Location: Boston, MA
Contact:

Re: No Spindle Output Centroid Acorn

Post by tblough »

Cheers,

Tom
Confidence is the feeling you have before you fully understand the situation.
I have CDO. It's like OCD, but the letters are where they should be.
Post Reply