threading issues after update <not update related, resolved>

All things related to the Centroid Acorn CNC Controller

Moderator: cnckeith

cnckeith
Posts: 7164
Joined: Wed Mar 03, 2010 4:23 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: Yes
Oak CNC controller: Yes
CNC Control System Serial Number: none
DC3IOB: Yes
CNC11: Yes
CPU10 or CPU7: Yes
Contact:

Re: threading issues after update

Post by cnckeith »

Mathes wrote: Mon Sep 19, 2022 1:55 am Hello,
I found the reason., the encoder counts the ppr only during low speed correctly.
In high-speed mode the encoder counts wrong. Changing the encoder everything works well.
Thanks for your support.
Mathias
great, thanks for reporting back.
Need support? READ THIS POST first. http://centroidcncforum.com/viewtopic.php?f=60&t=1043
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html
Post Reply