threading issues after update <not update related, resolved>

All things related to the Centroid Acorn CNC Controller

Moderator: cnckeith

Posts: 4665
Joined: Wed Mar 03, 2010 4:23 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: Yes
Oak CNC controller: Yes
MPU11 & GPIO4D -w/ 3rd Party Drives: Yes
CNC11: Yes
CPU10 or CPU7: Yes
CNC Control System Serial Number: none

Re: threading issues after update

Post by cnckeith »

Mathes wrote: Mon Sep 19, 2022 1:55 am Hello,
I found the reason., the encoder counts the ppr only during low speed correctly.
In high-speed mode the encoder counts wrong. Changing the encoder everything works well.
Thanks for your support.
great, thanks for reporting back.
Need support? READ THIS POST first.
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. ... _gear.html
Post Reply