I am retrofitting an Emco PC Turn 55 lathe. The spindle has a maximum speed of 4000 rpm.
What type of encoder for the spindle is recommended considering that the transmission ratio will be 1-1?
A model similar to the Omron E6B2-CWZ1X 1000P/R 0.5M?
Hugo
Emco PC Turn 55 lathe recommended encoder.
Moderator: cnckeith
-
- Posts: 1967
- Joined: Thu Sep 23, 2021 3:49 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: 6433DB0446C1-08115074
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
- Location: Germany
Re: Emco PC Turn 55 lathe recommended encoder.
Hi Hugo,
yes, this Omron works with 4000 rpm.
Uwe
yes, this Omron works with 4000 rpm.
Uwe