rpm on graph?

All things related to the Centroid Acorn CNC Controller

Moderator: cnckeith

Post Reply
chessie
Posts: 51
Joined: Thu Jun 18, 2020 3:06 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
CNC Control System Serial Number: none
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No
Location: Portishead UK

rpm on graph?

Post by chessie »

hi

I have a job running on my lathe cnc12 lathe pro ,and watch the program run after clicking the graph button .
is there a setting I can click so I get the rpm value on the graph screen ,I only see it on the g code screen

thanks
Top
suntravel
Posts: 1967
Joined: Thu Sep 23, 2021 3:49 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
CNC Control System Serial Number: 6433DB0446C1-08115074
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No
Location: Germany

Re: rpm on graph?

Post by suntravel »

Update to 4.80 then you will have actual and programmed rpm displayed in the RTG.

Uwe
Top
tblough
Posts: 3096
Joined: Tue Mar 22, 2016 10:03 am
Acorn CNC Controller: Yes
Allin1DC CNC Controller: Yes
Oak CNC controller: Yes
CNC Control System Serial Number: 100505
100327
102696
103432
7804732B977B-0624192192
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No
Location: Boston, MA
Contact:
Contact tblough

Re: rpm on graph?

Post by tblough »

If only some of these enhancements would filter down to the servo software. /*sigh*/
Cheers,

Tom
Confidence is the feeling you have before you fully understand the situation.
I have CDO. It's like OCD, but the letters are where they should be.
Top
cnckeith
Posts: 7306
Joined: Wed Mar 03, 2010 4:23 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: Yes
Oak CNC controller: Yes
CNC Control System Serial Number: none
DC3IOB: Yes
CNC11: Yes
CPU10 or CPU7: Yes
Contact:
Contact cnckeith

Re: rpm on graph?

Post by cnckeith »

tblough wrote: ↑Mon Aug 15, 2022 4:07 pm If only some of these enhancements would filter down to the servo software. /*sigh*/
its on the way.. we are porting and merging now!
Need support? READ THIS POST first. http://centroidcncforum.com/viewtopic.php?f=60&t=1043
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html
Top
chessie
Posts: 51
Joined: Thu Jun 18, 2020 3:06 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
CNC Control System Serial Number: none
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No
Location: Portishead UK

Re: rpm on graph?

Post by chessie »

suntravel wrote: ↑Mon Aug 15, 2022 2:57 pm Update to 4.80 then you will have actual and programmed rpm displayed in the RTG.

Uwe
Thanks
Top
Post Reply

Return to “Centroid Acorn CNC Controller”